Actions
Raspberry Pi IoT Setup » History » Revision 3
« Previous |
Revision 3/7
(diff)
| Next »
Spencer Sutterlin, 06/10/2014 01:45 AM
Raspberry Pi IoT Setup¶
Cross-compile:
- ndn-cxx
- NFD
On the Pi:
nano /etc/network/interfaces # Tweak networking as desired
sudo reboot
sudo apt-get update
sudo apt-get install git vim
sudo apt-get install build-essential
sudo apt-get install openssl expat libpcap-dev
sudo apt-get install libssl-dev libsqlite3-dev libcrypto++-dev libboost-all-dev
mkdir ~/ndn
cd ~/ndn
git clone https://github.com/named-data/PyNDN2.git
git clone https://github.com/remap/ndn-pi.git
echo "export PYTHONPATH=$PYTHONPATH:$HOME/ndn/PyNDN2/python:$HOME/ndn/ndn-pi" >> ~/.bashrc
sudo vim /etc/modules # Add “ipv6”
# Copy/install ndn-cxx/NFD from VM to PI
sudo visudo # Add “Defaults env_keep += “PYTHONPATH” (Don't clear PYTHONPATH for root since GPIO sensors must be run as root)
wget https://bootstrap.pypa.io/get-pip.py
sudo python get-pip.py
rm get-pip.py
sudo pip install pycrypto
sudo pip install trollius
If HDMI-CEC node:
cd ~/ndn
git clone https://github.com/Pulse-Eight/libcec
sudo apt-get install autoconf libtool pkg-config
sudo apt-get install liblockdev1-dev libudev-dev
./bootstrap
./configure --with-rpi-include-path="/opt/vc/include" --with-rpi-lib-path="/opt/vc/lib " --enable-rpi --enable-debug
make
sudo make install
sudo ldconfig
Updated by Spencer Sutterlin over 10 years ago · 7 revisions