Raspberry Pi IoT Status » History » Version 6
Spencer Sutterlin, 06/10/2014 02:31 AM
1 | 1 | Spencer Sutterlin | Raspberry Pi IoT Status |
---|---|---|---|
2 | ======================= |
||
3 | 3 | Spencer Sutterlin | |
4 | 1 | Spencer Sutterlin | On each Pi, get: |
5 | 3 | Spencer Sutterlin | |
6 | 2 | Spencer Sutterlin | * ndnx (just compile locally, doesn't take long) |
7 | * PyNDN2 |
||
8 | * ndn-pi |
||
9 | 1 | Spencer Sutterlin | * libcec (only needed on HDMI-CEC node) |
10 | |||
11 | 3 | Spencer Sutterlin | Devices: |
12 | |||
13 | 6 | Spencer Sutterlin | * NDN-PI-HDMI-CEC-1: 131.179.196.225 (WAN), 192.168.1.1 (LAN) |
14 | * NDN-PI-OCCUPANCY-1: 192.168.1.2 (LAN) |
||
15 | * NDN-PI-OCCUPANCY-2: 192.168.1.3 (LAN) |
||
16 | 5 | Spencer Sutterlin | |
17 | ## Full example: |
||
18 | In order to ssh into gateway pi (HDMI-CEC), must be on CS dept network. ssh into CS dept server first or be physically there. |
||
19 | |||
20 | Run the following in order. |
||
21 | |||
22 | Window 1 (Occupancy Node 1) |
||
23 | |||
24 | ssh pi@131.179.196.225 |
||
25 | ssh 192.168.1.2 |
||
26 | nfd-start |
||
27 | nfdc register /home 2 |
||
28 | sudo python app/occupancy_node_1.py |
||
29 | |||
30 | Window 2 (Occupancy Node 2) |
||
31 | |||
32 | ssh pi@131.179.196.225 |
||
33 | ssh 192.168.1.3 |
||
34 | nfd-start |
||
35 | nfdc register /home 2 |
||
36 | sudo python app/occupancy_node_1.py |
||
37 | |||
38 | Window 3 (HDMI-CEC Node) |
||
39 | |||
40 | ssh pi@131.179.196.225 |
||
41 | nfd-start |
||
42 | nfdc register /home 3 |
||
43 | python app/hdmi_cec_node.py |
||
44 | |||
45 | Window 4 (Consumer Node, physically, same node as HDMI-CEC Node) |
||
46 | |||
47 | ssh pi@131.179.196.225 |
||
48 | # don't start nfd here since already started |
||
49 | python app/consumer.py |