NLSR

; Mandatory
network
{
name "/ndn" ; Name prefix of the networks router belongs to in URI format.
}

; Mandatory
site-name
{
name "/edu/memphis/" ; Name of the site to which this router belongs to in URI
; format
}

; Mandatory
router-name
{
name "/router/name" ; Name of the router in URI format
}

; This configuration command is used to configure neighboring router
ndnneighbor
{
name "/name/of/neighbor1" ; Name of the neighbor in URI format
connecting-face 7 ; Face number of connecting face of the neighbor

link-cost 25.4 ; Link cost to reach the neighbor. Double value. If
; Link cost is not configured default value of 10 is
; used as link cost
}

; This configuration command is used to advertise the name prefix of the names
; reachable from this router
ndnname
{
name "/name/prefix1" ; name in URI format
}

; Root key prefix name, Mandatory
root-key-prefix
{
name "/root/key/prefix" ; name in URI format. This prefix is routable to
; each neighbor of this router
}

; Sync prefix for chronosync, Mandatory
chronosync-sync-prefix
{
name "/sync/prefix/" ; name in URI format. This prefix is routable to
; each neighbor
}

; Numer of time NLSR will try to send interest if interest is timed out
interest-retry-number
{
times 3 ; times in integer value. Default value is 3.
}

; Nlsr waits interest-resend-time before sendind out an interest again after
; interest has timed out
interest-resend-time
{
second 10 ; second in integer value. Default value is 1 second
}

; It is the time in seconds after which router will refresh its LSAs.
lsa-refresh-time
{
second 1800 ; second in interger value. Default value 3600
}

; Number of faces NLSR will add in NDN FIB for each reachable name prefixes
max-faces-per-prefix
{
number 5 ; number in integer value. Default value is 0 which
; add all available faces in FIB. This command can be
; used to restrict the number of faces added to FIB
}

; Directory where NLSR will write its log
log-dir
{
directory "/path/to/log/dir" ; Path of directory in string.
}

; Type of faces will be added in NDN FIB
tunnel-type
{
type "udp" ; type in string. Either udp or tcp can be used as value
}

; used for turning debugging of NLSR on or off
debugging
{
on-off "off" ; string value. Either on or off can be used as value
}

; used for turning detalied debugging of NLSR on or off
detailed-logging
{
on-off "off" ; string value. Either on or off can be used as value
}

; Used to configure NLSR to calculate hyper bolic routing table
hyperbolic-routing
{
mode "ON" ; String value. Three values: ON - Hyperbolic routing,
; off - Hyperbolic off, calculate Link state routing
; dry-run - calculate both hyperbolic and link state
; routing for testing and comparing them. But link state
; table is used to update FIB
}

; Used to configure hyperbolic coordinate of the router. Mandatory if 'hyperbolic-routing'
; is 'on' or 'dry-run'
hyperbolic-cordinate
{
radius 10.1 ; hyperbolic radius in double
angle 0.34 ; hyperbolic angle in double
}