CsMgmt » History » Revision 10
Revision 9 (Junxiao Shi, 02/08/2018 05:48 PM) → Revision 10/20 (Davide Pesavento, 02/09/2018 01:48 PM)
# Content Store Management **Content Store Management** is a module of [[Management|NFD Management protocol]]. It provides commands and datasets about the Content Store and its usage in forwarding. Content Store Management commands and datasets are available under namespace `ndn:/localhost/nfd/cs`. ## Control Commands [[ControlCommand]] **management-module**: `cs` ### Update config **command-verb**: `config` This command updates CS configuration. To discover the current configuration, either retrieve the CS Information Dataset, or send an empty `config` command. ControlParameters fields: * Capacity (optional): maximum number of CS entries. * Flags (optional): CS enablement flags (see below). * Mask (optional): must be specified if Flags is present, or omitted if Flags is omitted. Flags is an inclusive OR of CS enablement flags. 1=CS\_ENABLE\_ADMIT, enables the CS to admit new Data. 2=CS\_ENABLE\_SERVE, enables the CS to satisfy Interests using cached Data. The initial value of the CS is CS\_ENABLE\_ADMIT | CS\_ENABLE\_SERVE. If all fields are omitted, the command has no effect but is still considered successful. If the command succeeds, \<Body> in ControlResponse block contains updated ControlParameters reflecting current configuration: * Capacity (required) * Flags (required) Note to future protocol designers: when the CS is extended to have multiple storage tiers (such as RAM and SSD), ControlParameter shall have an optional Name field to indicate the storage tier being configured. ### Erase entry **command-verb**: `erase` This command erases entries from the CS. ControlParameters fields: * Name (required): name prefix to start erasing. * NCsEntries (optional): maximum number of entries to erase, default is 1. This command causes the forwarder NFD to erase up to *NCsEntries* CS entries under the specified name prefix *Name*. If the command succeeds, \<Body> in ControlResponse block contains updated ControlParameters indicating the result: * Name (required) * Capacity (optional): upper bound of *NCsEntries*, included only when the upper bound is exceeded. * NCsEntries (required): actual number of erased entries. If there is no CS entry under the specified name prefix, the command does nothing but is still considered successful. A forwarder NFD MAY impose an a upper bound on *NCsEntries*. This upper bound MUST NOT be zero. If *NCsEntries* in a request exceeds the upper bound, the forwarder NFD erases entries until reaching the upper bound, responds with status code 206, and includes the upper bound in the *Capacity* field of the response body. The current upper bound in NFD is 64 entries. ## CS Information Dataset CS config and runtime performance are published as a [[StatusDataset|Status Dataset]] at `ndn:/localhost/nfd/cs/info`. CsInfo ::= CS-INFO-TYPE TLV-LENGTH Capacity Flags NCsEntries NHits NMisses (TLVs have nonNegativeInteger as value) Note to future protocol designers: in CsInfo element, fields that reflect configuration shall be placed before fields that reflect runtime counters. Note to future protocol designers: when the CS is extended to have multiple storage tiers (such as RAM and SSD), each storage tier shall have separate counters, multiple CsInfo elements appear in the dataset and each has a Name field as the first child to indicate the storage tier. ## CS Enumeration A subset of CS entries can be queried into a [[StatusDataset|Status Dataset]] under `ndn:/localhost/nfd/cs/query`. CsQuery ::= CS-QUERY-TYPE TLV-LENGTH Name PacketSize FreshnessPeriod (TLVs have nonNegativeInteger as value) ## TLV-TYPE assignments Type | Assigned number | Assigned number (hex) ------------------------------------------- | ----------------- | --------------------- CsInfo | 128 | 0x80 Capacity | 131 | 0x83 Flags | 108 | 0x6c NCsEntries | 135 | 0x87 NHits | 129 | 0x81 NMisses | 130 | 0x82