FaceMgmt » History » Revision 53
Revision 52 (Junxiao Shi, 08/11/2016 11:23 AM) → Revision 53/118 (Junxiao Shi, 08/12/2016 12:21 PM)
# Face Management
{{toc}}
**Face Management** is a module of [[Management|NFD Management protocol]].
It provides:
* commands to create and destroy faces
* commands to enable and disable [[LocalControlHeader]] features on a face
* a dataset of description of all active faces and their counters
* a dataset of description of all active channels
* a notification stream for face creating and destroying events
Face Management commands, datasets, and notifications are available under namespace `ndn:/localhost/nfd/faces`.
## FaceUri
A FaceUri represents the underlying protocol and address used by a Face.
Every Face has two FaceUris: one for local endpoint, and the other for remote endpoint.
### UDP
`udp[4|6]://<IP-or-host>[:<port>]`
Examples:
* `udp4://192.0.2.1:6363` (canonical form)
* `udp6://[2001:db8::1]:6363` (canonical form)
* `udp://192.0.2.1` (remote-port defaults to 6363)
* `udp://example.net:6363`
* `udp4://example.net:6363` (resolve hostname to IPv4 address only)
* `udp6://example.net:6363` (resolve hostname to IPv6 address only)
* `udp4://224.0.23.170:56363` (multicast, canonical form)
LocalUri of a NIC-associated UDP face has the form `udp[4|6]://[::%<NIC>]:<port>`.
This is only used in face dataset.
Examples:
* `udp4://[::%eth1]:6363`
* `udp6://[::%en0]:6363`
### TCP
`tcp[4|6]://<IP-or-host>[:<port>]`
Examples:
* `tcp4://192.0.2.1:6363` (canonical form)
* `tcp6://[2001:db8::1]:6363` (canonical form)
* `tcp://192.0.2.1` (remote-port defaults to 6363)
* `tcp://example.net:6363`
* `tcp4://example.net:6363` (resolve hostname to IPv4 address only)
* `tcp6://example.net:6363` (resolve hostname to IPv6 address only)
### UNIX stream
`unix://<path>`
Examples:
* `unix:///var/run/nfd.sock` (note there are three forward-slashes after 'unix')
### File Descriptor
`fd://<file-descriptor>`
Examples:
* `fd://6`
### Ethernet
`ether://[<MAC>]`
Examples:
* `ether://[08:00:27:01:01:01]`
* `ether://[33:33:01:01:01:01]` (multicast)
### Network Device
`dev://<ifname>`
Examples:
* `dev://eth0`
### Underlying protocol and FaceUri scheme
Underlying protocol | remote FaceUri scheme | local FaceUri scheme
------------------- | -------------------------------- | --------------------------
IPv4 UDP unicast | udp4 | udp4
IPv6 UDP unicast | udp6 | udp6
IPv4 UDP multicast | udp4 (multicast IP) | udp4 (local IP, same port)
IPv4 TCP | tcp4 | tcp4
IPv6 TCP | tcp6 | tcp6
UNIX stream | fd (file descriptor on NFD side) | unix (socket path)
Ethernet multicast | ether | dev
## Static Face Attributes
**FaceScope** indicates whether the face is local for [[ScopeControl|scope control]] purposes.
* non-local(=0)
* local(=1)
**FacePersistency** indicates whether the face is persistent.
* on-demand(=1), face closes if it remains idle for some time
* persistent(=0), face remains open until it's explicitly destroyed or there's a transport failure
* permanent(=2), face remains open until it's explicitly destroyed; transport failures will be recovered internally
**LinkType** indicates the type of communication link.
* point-to-point(=0), communication with one peer
* multi-access(=1), communication with a multicast group
**LocalFieldsEnabled** indicates whether the face allows [[NDNLPv2]] NextHopFaceId, CachePolicy, IncomingFaceId fields.
* yes(=1), allows these fields; this is valid only if FaceScope=local
* no(=0), disallows these fields
### Flags and Mask
Some attributes are collected as inclusive OR into a **Flags** field in commands and datasets.
These attributes are: (bit 0 is the least significant bit)
* bit 0: LocalFieldsEnabled
In `create` and `update` commands, the **Flags** field must be accompanied by a **Mask** field which indicates which static attributes should be set.
Bits in the Mask field is arranged in the same order as the Flags field.
If a bit in Mask is zero, `faces/create` command keeps the default setting of the attribute, `faces/update` command keeps the old value of the attribute.
## Control Commands
[[ControlCommand]] **management-module**: `faces`
### Create a face
**command-verb**: `create`
ControlParameters fields:
* Uri (required): a canonical UDP unicast or TCP FaceUri
* FacePersistency (optional): either *persistent* or *permanent*; creating on-demand faces is disallowed.
The default is *persistent*.
See "static face attributes" for more information.
* Flags (optional): see "static face attributes".
* Mask (optional): see "static face attributes".
This command allows creation of UDP unicast and TCP faces only.
If the command succeeds, \<body> in ControlResponse block contains updated ControlParameters:
* FaceId
* FacePersistency
* Flags: contains *LocalFieldsEnabled* bit
If this creation would conflict with another existing face (e.g. same underlying protocol and remote address, or a NIC-associated permanent face), the command fails with StatusCode 409, and \<body> in ControlResponse block contains ControlParameters describing the existing face including these fields:
* FaceId
* Uri
* FacePersistency
If the request attempts to create a face other than UDP unicast and TCP faces, or a static property specified is not acceptable, the command fails with StatusCode 406.
If face creation fails due to a socket error (e.g. TCP connection timeout), the command fails with StatusCode 504.
### Update static properties
**command-verb**: `update`
ControlParameters fields:
* FaceId (optional)
* FacePersistency (optional): *on-demand* or *persistent* or *permanent*
See "static face attributes" for more information.
* Flags (optional): allows *LocalFieldsEnabled* only, see "static face attributes".
* Mask (optional): see "static face attributes".
FaceId is the FaceId returned in [[FaceMgmt|Face Management]].
If FaceId is omitted or is set to zero, it is implied as the requesting face (self updating).
If face does not exist, this command fails with StatusCode 404.
Static properties of the face is updated.
If an optional property field is omitted or a bitfield is zero in Mask, that static property remains unchanged.
If no static all optional property fields are omitted or Mask is changed, specified as zero, this command does nothing, but is still considered successful.
If any of the requested changes is invalid, none of the changes should be performed, and this command fails with StatusCode 409.
The \<body> in ControlResponse block contains ControlParameters that includes only invalid fields; if some of the bit fields chosen in Flags+Mask is invalid, the \<body> block should also contain a Mask field indicating which bits are invalid, and echo back the original Flags field.
If the request has been sent with these fields (or bitfields in Mask) removed, it would have been successful.
### Destroy a face
**command-verb:** `destroy`
ControlParameters fields:
* FaceId (required)
If the specified face does not exist, this command does nothing, but is still considered successful.
## Face Dataset
Description and counters of all active faces are published as a [[StatusDataset|Status Dataset]] at `ndn:/localhost/nfd/faces/list`.
Each face is represented by a **FaceStatus** block:
FaceStatus ::= FACE-STATUS-TYPE TLV-LENGTH
FaceId
Uri (remote FaceUri)
LocalUri
ExpirationPeriod?
FaceScope
FacePersistency
LinkType
Flags
NInInterests
NInDatas
NInNacks
NOutInterests
NOutDatas
NOutNacks
NInBytes
NOutBytes
Uri ::= URI-TYPE TLV-LENGTH
FaceUri in UTF-8 encoding
LocalUri ::= LOCAL-URI-TYPE TLV-LENGTH
FaceUri in UTF-8 encoding
; other TLVs have nonNegativeInteger as value
* **Uri** is a FaceUri representing remote endpoint.
* **LocalUri** is a FaceUri representing local endpoint.
* **ExpirationPeriod** is the remaining lifetime of this face.
If this field is omitted, the face has infinite lifetime.
Currently, this is applicable to on-demand datagram faces only.
* **FaceScope** indicates whether the face is local for [[ScopeControl|scope control]] purposes.
See "static face attributes" for more information.
* **FacePersistency** indicates whether the face is persistent.
See "static face attributes" for more information.
* **LinkType** indicates the type of communication link
See "static face attributes" for more information.
* **Flags** contains these bitfields: *LocalFieldsEnabled*.
See "static face attributes" for more information.
* **NInInterests**: number of incoming Interest packets since the face is established.
* **NInDatas** counts the number of incoming Data packets since the face is established.
* **NInNacks** counts the number of incoming Nack packets since the face is established.
* **NOutInterests** counts the number of outgoing Interest packets since the face is established.
* **NOutDatas** counts the number of outgoing Data packets since the face is established.
* **NOutNacks** counts the number of outgoing Nack packets since the face is established.
* **NInBytes** counts the number of bytes of link layer packets received via this face.
This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.
* **NOutBytes** counts the number of bytes of link layer packets sent via this face.
This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.
### Query Operation
The query operation allows one to retrieve a subset of face dataset that contains faces satisfying a filter.
To run a query, the consumer should express an Interest with Name: `ndn:/localhost/nfd/faces/query/<filter>`, where `<filter>` is a **FaceQueryFilter** block that specifies zero or more conditions.
FaceQueryFilter ::= FACE-QUERY-FILTER-TYPE TLV-LENGTH
FaceId?
UriScheme?
Uri?
LocalUri?
FaceScope?
FacePersistency?
LinkType?
UriScheme ::= URI-SCHEME-TYPE TLV-LENGTH
string in UTF-8
* **FaceId** permits a face if its FaceId equals the value
* **UriScheme** permits a face if the scheme part of its local FaceUri or remote FaceUri equals the value
* **Uri** permits a face if its remote FaceUri equals the value
* **LocalUri** permits a face if its local FaceUri equals the value
* **FaceScope** permits a face if its *FaceScope* attribute equals the value
* **FacePersistency** permits a face if its *FacePersistency* attribute equals the value
* **LinkType** permits a face if its *LinkType* attribute equals the value
A face must satisfy ALL conditions to satisfy the filter.
Faces that satisfy the filter are represented by **FaceStatus** blocks, and published as a [[StatusDataset]] under the Interest Name (a Data packet's Name would be `ndn:/localhost/nfd/faces/query/<filter>/<version>/<segment>`).
Examples of filters:
* a specific face: FaceId=260
* a specific TCP tunnel: Uri=tcp4://192.0.2.1:6363
note: FaceUri must precisely match the canonical form: use either "tcp4" or "tcp6" instead of "tcp", use IP address instead of DNS name, include port number
* all TCP tunnels: UriScheme=tcp
note: "tcp" permits both "tcp4" and "tcp6", "udp" permits both "udp4" and "udp6"
* all UDP multicast faces: UriScheme=udp & LinkType=multi-access
* all Ethernet faces: UriScheme=ether
note: UriScheme matches on both local and remote FaceUri, "dev" also works
* all faces: no condition
note: this is equivalent to face dataset, and face dataset should be preferred for this purpose
## Channel Dataset
Description of all active channels is published as a [[StatusDataset|Status Dataset]] at `ndn:/localhost/nfd/faces/channels`.
Each channel is represented by a **ChannelStatus** block:
ChannelStatus := CHANNEL-STATUS-TYPE TLV-LENGTH
LocalUri
* **LocalUri** is a FaceUri representing local endpoint.
## Face Status Change Notification
Face status change events are published as a [[Notification|Notification Stream]] at `ndn:/localhost/nfd/faces/events`.
Notifications of all faces are sent into the same notification stream.
The Content of each notification Data packet is a `FaceEventNotification` block:
FaceEventNotification ::= FACE-EVENT-NOTIFICATION-TYPE TLV-LENGTH
FaceEventKind
FaceId
Uri
LocalUri
FaceScope
FacePersistency
LinkType
FaceEventKind ::= FACE-EVENT-KIND-TYPE TLV-LENGTH
nonNegativeInteger
**FaceEventKind** indicates the kind of event. Its possible values are:
* **1**: face is created
* **2**: face is destroyed
## TLV-TYPE assignments
Type | Assigned value | Assigned value (hex)
------------------------------------------- | ----------------- | --------------------
FaceStatus | 128 | 0x80
LocalUri | 129 | 0x81
ChannelStatus | 130 | 0x82
FaceScope | 132 | 0x84
FacePersistency | 133 | 0x85
LinkType | 134 | 0x86
NInInterests | 144 | 0x90
NInDatas | 145 | 0x91
NInNacks | 151 | 0x97
NOutInterests | 146 | 0x92
NOutDatas | 147 | 0x93
NOutNacks | 152 | 0x98
NInBytes | 148 | 0x94
NOutBytes | 149 | 0x95
FaceQueryFilter | 150 | 0x96
UriScheme | 131 | 0x83
FaceEventNotification | 192 | 0xc0
FaceEventKind | 193 | 0xc1
(reserved, formerly FaceFlags) | 194 | 0xc2