Project

General

Profile

FaceMgmt » History » Version 118

Davide Pesavento, 06/28/2020 02:17 PM

1 20 Junxiao Shi
# Face Management
2 1 Junxiao Shi
3 82 Davide Pesavento
{{>toc}}
4 38 Alex Afanasyev
5 20 Junxiao Shi
**Face Management** is a module of [[Management|NFD Management protocol]].
6
It provides:
7 1 Junxiao Shi
8 100 Davide Pesavento
* commands to create, modify, and destroy faces
9
* a dataset containing the description of all active faces and their counters
10
* a dataset containing the description of all active channels
11
* a notification stream for face events
12 1 Junxiao Shi
13 45 Junxiao Shi
Face Management commands, datasets, and notifications are available under namespace `ndn:/localhost/nfd/faces`.
14 12 Alex Afanasyev
15
16 20 Junxiao Shi
## FaceUri
17 1 Junxiao Shi
18 27 Junxiao Shi
A FaceUri represents the underlying protocol and address used by a Face.  
19
Every Face has two FaceUris: one for local endpoint, and the other for remote endpoint.
20 1 Junxiao Shi
21 27 Junxiao Shi
### UDP
22 9 Junxiao Shi
23 30 Junxiao Shi
`udp[4|6]://<IP-or-host>[:<port>]`  
24 2 Alex Afanasyev
25 9 Junxiao Shi
Examples:
26 1 Junxiao Shi
27 20 Junxiao Shi
* `udp4://192.0.2.1:6363` (canonical form)
28
* `udp6://[2001:db8::1]:6363` (canonical form)
29 71 Alex Afanasyev
* `udp6://[fe80::1068:dddb:fe26:fe3f%en0]:6363` (canonical form for link-local IPv6 addresses)
30
* `udp6://[fe80::1068:dddb:fe26:fe3f%25en0]:6363` (equivalent, but not canonical, version of the above FaceUri)
31 1 Junxiao Shi
* `udp://192.0.2.1` (remote-port defaults to 6363)
32
* `udp://example.net:6363`
33
* `udp4://example.net:6363` (resolve hostname to IPv4 address only)
34 9 Junxiao Shi
* `udp6://example.net:6363` (resolve hostname to IPv6 address only)
35 27 Junxiao Shi
* `udp4://224.0.23.170:56363` (multicast, canonical form)
36 1 Junxiao Shi
37 103 Davide Pesavento
LocalUri of a netdev-bound UDP face has the form:
38 61 Davide Pesavento
39 103 Davide Pesavento
`udp[4|6]+dev://<interface-name>:<port>`
40 61 Davide Pesavento
41 1 Junxiao Shi
This is only used in face dataset.
42 61 Davide Pesavento
43 51 Junxiao Shi
Examples:
44
45 60 Junxiao Shi
* `udp4+dev://eth1:6363`
46
* `udp6+dev://en0:6363`
47 51 Junxiao Shi
48 1 Junxiao Shi
### TCP
49
50 30 Junxiao Shi
`tcp[4|6]://<IP-or-host>[:<port>]`
51 1 Junxiao Shi
52
Examples:
53
54 20 Junxiao Shi
* `tcp4://192.0.2.1:6363` (canonical form)
55
* `tcp6://[2001:db8::1]:6363` (canonical form)
56 71 Alex Afanasyev
* `tcp6://[fe80::1068:dddb:fe26:fe3f%en0]:6363` (canonical form for link-local IPv6 addresses)
57
* `tcp6://[fe80::1068:dddb:fe26:fe3f%25en0]:6363` (equivalent, but not canonical, version of the above FaceUri)
58 1 Junxiao Shi
* `tcp://192.0.2.1` (remote-port defaults to 6363)
59
* `tcp://example.net:6363`
60 9 Junxiao Shi
* `tcp4://example.net:6363` (resolve hostname to IPv4 address only)
61 1 Junxiao Shi
* `tcp6://example.net:6363` (resolve hostname to IPv6 address only)
62
63
### UNIX stream
64
65 9 Junxiao Shi
`unix://<path>`
66 1 Junxiao Shi
67
Examples:
68
69 61 Davide Pesavento
* `unix:///var/run/nfd.sock` (note that there are three forward-slashes after 'unix:')
70 1 Junxiao Shi
71 84 Davide Pesavento
### File descriptor
72 30 Junxiao Shi
73
`fd://<file-descriptor>`
74
75
Examples:
76
77
* `fd://6`
78
79 1 Junxiao Shi
### Ethernet
80 27 Junxiao Shi
81 42 Junxiao Shi
`ether://[<MAC>]`
82 1 Junxiao Shi
83
Examples:
84 42 Junxiao Shi
85
* `ether://[08:00:27:01:01:01]`
86 1 Junxiao Shi
* `ether://[33:33:01:01:01:01]` (multicast)
87
88 84 Davide Pesavento
### Network device
89 1 Junxiao Shi
90 61 Davide Pesavento
`dev://<interface-name>`
91 30 Junxiao Shi
92
Examples:
93
94 1 Junxiao Shi
* `dev://eth0`
95
96 103 Davide Pesavento
### Underlying protocol and FaceUri schemes
97 1 Junxiao Shi
98 67 Junxiao Shi
Underlying protocol     | Remote FaceUri scheme            | Local FaceUri scheme
99 1 Junxiao Shi
----------------------- | -------------------------------- | --------------------------
100 67 Junxiao Shi
IPv4 UDP unicast        | udp4                             | udp4
101
IPv6 UDP unicast        | udp6                             | udp6
102 103 Davide Pesavento
IPv4 UDP multicast      | udp4 (multicast group)           | udp4
103
IPv6 UDP multicast      | udp6 (multicast group)           | udp6
104
IPv4 UDP netdev-bound   | udp4                             | udp4+dev
105
IPv6 UDP netdev-bound   | udp6                             | udp6+dev
106 67 Junxiao Shi
IPv4 TCP                | tcp4                             | tcp4
107
IPv6 TCP                | tcp6                             | tcp6
108
UNIX stream             | fd (file descriptor on NFD side) | unix (socket path)
109
Ethernet unicast        | ether                            | dev
110
Ethernet multicast      | ether                            | dev
111
WebSocket               | wsclient                         | ws
112 46 Junxiao Shi
113 108 Davide Pesavento
## Face Properties
114 46 Junxiao Shi
115
**FaceScope** indicates whether the face is local for [[ScopeControl|scope control]] purposes.
116
117
* non-local(=0)
118
* local(=1)
119
120
**FacePersistency** indicates whether the face is persistent.
121
122
* on-demand(=1), face closes if it remains idle for some time
123
* persistent(=0), face remains open until it's explicitly destroyed or there's a transport failure
124
* permanent(=2), face remains open until it's explicitly destroyed; transport failures will be recovered internally
125
126
**LinkType** indicates the type of communication link.
127
128
* point-to-point(=0), communication with one peer
129
* multi-access(=1), communication with a multicast group
130 75 Davide Pesavento
* ad-hoc(=2), communication over a wireless ad hoc network
131 52 Junxiao Shi
132
**LocalFieldsEnabled** indicates whether the face allows [[NDNLPv2]] NextHopFaceId, CachePolicy, IncomingFaceId fields.
133
134
* yes(=1), allows these fields; this is valid only if FaceScope=local
135
* no(=0), disallows these fields
136
137 74 Eric Newberry
**LpReliabilityEnabled** indicates whether the face has the [[NDNLPv2]] reliability feature enabled.
138 69 Eric Newberry
139
* yes(=1), enables this feature
140
* no(=0), disables this feature
141 1 Junxiao Shi
142 74 Eric Newberry
**CongestionMarkingEnabled** indicates whether the face has congestion marking based upon send queue length enabled.
143
144
* yes(=1), enables this feature
145
* no(=0), disables this feature
146
147
**BaseCongestionMarkingInterval** indicates the base marking interval for congestion marking.
148
149 102 Davide Pesavento
* The value of this attribute is the base marking interval in nanoseconds, which is used to compute the interval at which congested packets will be marked.
150 74 Eric Newberry
151
**DefaultCongestionThreshold** indicates the default congestion threshold if the face does not support retrieving the send queue capacity.
152
153 102 Davide Pesavento
* The value of this attribute is the default congestion threshold in bytes.
154 74 Eric Newberry
155 85 Eric Newberry
**Mtu** contains a user-specified MTU to override the automatic MTU of the transport.
156
157 109 Davide Pesavento
* The value of this attribute is the override MTU of the transport in bytes. The face will use the lesser of this value and the automatic MTU of the underlying transport.
158 85 Eric Newberry
159 52 Junxiao Shi
### Flags and Mask
160
161
Some attributes are collected as inclusive OR into a **Flags** field in commands and datasets.
162
These attributes are: (bit 0 is the least significant bit)
163
164
* bit 0: LocalFieldsEnabled
165 1 Junxiao Shi
* bit 1: LpReliabilityEnabled
166 74 Eric Newberry
* bit 2: CongestionMarkingEnabled
167 55 Junxiao Shi
168 1 Junxiao Shi
## Control Commands
169
170 20 Junxiao Shi
[[ControlCommand]] **management-module**: `faces`
171 41 Junxiao Shi
172
### Create a face
173 1 Junxiao Shi
174
**command-verb**: `create`
175 46 Junxiao Shi
176
ControlParameters fields:
177 1 Junxiao Shi
178
* **Uri** (required): canonical remote FaceUri of the face to create.
179 72 Davide Pesavento
* **LocalUri** (optional): canonical local FaceUri of the face to create; e.g., FaceUri of the local interface for an Ethernet unicast face.
180 108 Davide Pesavento
* **FacePersistency** (optional): either *persistent* or *permanent*; creating *on-demand* faces is not permitted. The default is *persistent*. See "face properties" for more information.
181
* **BaseCongestionMarkingInterval** (optional): see "face properties".
182
* **DefaultCongestionThreshold** (optional): see "face properties".
183
* **Mtu** (optional): see "face properties".
184
* **Flags** (optional): see "face properties".
185 83 Davide Pesavento
* **Mask** (optional): MUST be specified if *Flags* is present, and omitted if *Flags* is omitted.
186 1 Junxiao Shi
187 65 Davide Pesavento
This command allows the creation of UDP unicast, Ethernet unicast, and TCP faces only.  
188 50 Junxiao Shi
If the command succeeds, the \<body> of the ControlResponse block contains the ControlParameters describing the current properties of the created face:
189 1 Junxiao Shi
190 64 Alex Afanasyev
* **FaceId**
191 1 Junxiao Shi
* **Uri**
192 64 Alex Afanasyev
* **LocalUri**
193 1 Junxiao Shi
* **FacePersistency**
194 78 Eric Newberry
* **BaseCongestionMarkingInterval** (optional)
195
* **DefaultCongestionThreshold** (optional)
196 109 Davide Pesavento
* **Mtu** (optional): effective MTU, see below.
197 90 Eric Newberry
* **Flags**: contains effective values for the *LocalFieldsEnabled*, *LpReliabilityEnabled*, and *CongestionMarkingEnabled* bits.
198 66 Davide Pesavento
199 97 Davide Pesavento
If this creation would conflict with an existing face (e.g., same underlying protocol and remote endpoint), the command fails with StatusCode 409, and the \<body> of the ControlResponse block contains the ControlParameters describing the existing face, with the same fields as above.
200 52 Junxiao Shi
201 110 Davide Pesavento
If the request attempts to create a face other than UDP unicast, Ethernet unicast, or TCP, or if a property specified in the request is not acceptable, the command fails with StatusCode 406.
202 79 Eric Newberry
203 1 Junxiao Shi
If face creation fails due to a socket error (e.g. TCP connection timeout), the command fails with StatusCode 504.
204
205 110 Davide Pesavento
If *BaseCongestionMarkingInterval* or *DefaultCongestionThreshold* are omitted from the ControlParameters sent with the creation command, the omitted properties are left at their implementation-defined default values.
206 1 Junxiao Shi
207 113 Eric Newberry
If *Mtu* is omitted from the ControlParameters sent with the creation command, no override MTU is specified and the automatic MTU of the transport will be used. A forwarder MAY impose an implementation-defined minimum and maximum to the override MTU specified during face creation. The current minimum and maximum in NFD are 64 and `MAX_NDN_PACKET_SIZE` (8800) bytes, respectively. In the response, the *Mtu* field in ControlParameters contains the effective MTU of the face (in bytes), capped at a maximum of `MAX_NDN_PACKET_SIZE` (8800 bytes), even if the MTU of the underlying transport is infinite. If *Mtu* is omitted from the response, the face and/or forwarder does not support MTU reporting.
208 85 Eric Newberry
209 110 Davide Pesavento
### Update the properties of a face
210 1 Junxiao Shi
211 52 Junxiao Shi
**command-verb**: `update`
212 1 Junxiao Shi
213
ControlParameters fields:
214 64 Alex Afanasyev
215
* **FaceId** (optional)
216 108 Davide Pesavento
* **FacePersistency** (optional): one of *on-demand*, *persistent*, or *permanent*. See "face properties" for more information.
217
* **BaseCongestionMarkingInterval** (optional): see "face properties".
218
* **DefaultCongestionThreshold** (optional): see "face properties".
219
* **Mtu** (optional): see "face properties".
220
* **Flags** (optional): allows *LocalFieldsEnabled*, *LpReliabilityEnabled*, and *CongestionMarkingEnabled* only. See "face properties" for more information.
221 81 Davide Pesavento
* **Mask** (optional): MUST be specified if *Flags* is present, and omitted if *Flags* is omitted.
222 52 Junxiao Shi
223 101 Davide Pesavento
If *FaceId* is omitted or is set to zero, it is implied to be that of the requesting face (self-update).
224
If the face does not exist, the command fails with StatusCode 404.
225 111 Eric Newberry
226 1 Junxiao Shi
The properties of the face are updated as indicated.
227
If an optional property field is omitted or a bitfield is zero in *Mask*, that property remains unchanged.
228 110 Davide Pesavento
If no properties are changed, this command does nothing, but is still considered successful.
229 113 Eric Newberry
230 115 Davide Pesavento
As with `faces/create`, a forwarder may clamp the MTU value specified when updating a face. The aforementioned implementation-specific bounds still apply for NFD.
231 55 Junxiao Shi
232 1 Junxiao Shi
If the command succeeds, \<body> in ControlResponse block contains ControlParameters describing the current properties of the face:
233
234
* **FaceId**
235
* **FacePersistency**
236 78 Eric Newberry
* **BaseCongestionMarkingInterval** (optional)
237
* **DefaultCongestionThreshold** (optional)
238 109 Davide Pesavento
* **Mtu** (optional): effective MTU.
239 81 Davide Pesavento
* **Flags**: contains effective values for *LocalFieldsEnabled*, *LpReliabilityEnabled*, and *CongestionMarkingEnabled* bits.
240 1 Junxiao Shi
241
If any of the requested changes is invalid, none of the changes should be performed, and this command fails with StatusCode 409.
242 81 Davide Pesavento
The \<body> in ControlResponse block contains ControlParameters that includes only invalid fields; if some of the bit fields chosen in *Flags*+*Mask* is invalid, the \<body> block should also contain a *Mask* field indicating which bits are invalid, and echo back the original *Flags* field.
243
If the request had been sent without those fields (or bitfields in *Mask*), it would have been successful.
244 20 Junxiao Shi
245 1 Junxiao Shi
### Destroy a face
246 20 Junxiao Shi
247 26 Junxiao Shi
**command-verb:** `destroy`
248 20 Junxiao Shi
249 39 Junxiao Shi
ControlParameters fields:
250 1 Junxiao Shi
251 64 Alex Afanasyev
* **FaceId** (required)
252 39 Junxiao Shi
253 1 Junxiao Shi
If the specified face does not exist, this command does nothing, but is still considered successful.
254
255 40 Junxiao Shi
## Face Dataset
256 1 Junxiao Shi
257
Description and counters of all active faces are published as a [[StatusDataset|Status Dataset]] at `ndn:/localhost/nfd/faces/list`.
258 39 Junxiao Shi
259
Each face is represented by a **FaceStatus** block:
260 1 Junxiao Shi
261 116 Davide Pesavento
    FaceStatus      = FACE-STATUS-TYPE TLV-LENGTH
262
                        FaceId
263
                        Uri
264
                        LocalUri
265
                        [ExpirationPeriod]
266
                        FaceScope
267
                        FacePersistency
268
                        LinkType
269
                        [BaseCongestionMarkingInterval]
270
                        [DefaultCongestionThreshold]
271
                        [Mtu]
272
                        NInInterests
273
                        NInData
274
                        NInNacks
275
                        NOutInterests
276
                        NOutData
277
                        NOutNacks
278
                        NInBytes
279
                        NOutBytes
280
                        Flags
281 46 Junxiao Shi
282 116 Davide Pesavento
    Uri             = URI-TYPE TLV-LENGTH
283
                        UTF-8-STRING ; FaceUri in UTF-8 encoding
284 46 Junxiao Shi
285 116 Davide Pesavento
    LocalUri        = LOCAL-URI-TYPE TLV-LENGTH
286
                        UTF-8-STRING ; FaceUri in UTF-8 encoding
287 1 Junxiao Shi
    
288 118 Davide Pesavento
    (all other TLVs have NonNegativeInteger as value)
289 1 Junxiao Shi
290 40 Junxiao Shi
* **Uri** is a FaceUri representing remote endpoint.
291 39 Junxiao Shi
* **LocalUri** is a FaceUri representing local endpoint.
292 40 Junxiao Shi
* **ExpirationPeriod** is the remaining lifetime of this face.
293 46 Junxiao Shi
  If this field is omitted, the face has infinite lifetime.
294 40 Junxiao Shi
  Currently, this is applicable to on-demand datagram faces only.
295 46 Junxiao Shi
* **FaceScope** indicates whether the face is local for [[ScopeControl|scope control]] purposes.
296 108 Davide Pesavento
  See "face properties" for more information.
297 40 Junxiao Shi
* **FacePersistency** indicates whether the face is persistent.
298 108 Davide Pesavento
  See "face properties" for more information.
299 52 Junxiao Shi
* **LinkType** indicates the type of communication link
300 108 Davide Pesavento
  See "face properties" for more information.
301 77 Eric Newberry
* **BaseCongestionMarkingInterval** indicates the base interval used to compute the interval at which congested packets will be marked (in nanoseconds).
302 108 Davide Pesavento
  See "face properties" for more information.
303
* **DefaultCongestionThreshold** indicates the default threshold for congestion if the face does not support retrieving the send queue capacity (in bytes).
304 94 Davide Pesavento
  See "face properties" for more information.
305 108 Davide Pesavento
* **Mtu** contains the effective MTU of the face (in bytes), capped at `MAX_NDN_PACKET_SIZE` (8800 bytes), even if the MTU of the underlying transport is infinite. If this field is omitted, the forwarder and/or face does not support MTU reporting.
306 46 Junxiao Shi
* **NInInterests**: number of incoming Interest packets since the face is established.
307 67 Junxiao Shi
* **NInData** counts the number of incoming Data packets since the face is established.
308 46 Junxiao Shi
* **NInNacks** counts the number of incoming Nack packets since the face is established.
309 1 Junxiao Shi
* **NOutInterests** counts the number of outgoing Interest packets since the face is established.
310 67 Junxiao Shi
* **NOutData** counts the number of outgoing Data packets since the face is established.
311 37 Junxiao Shi
* **NOutNacks** counts the number of outgoing Nack packets since the face is established.
312
* **NInBytes** counts the number of bytes of link layer packets received via this face.
313
  This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.
314 1 Junxiao Shi
* **NOutBytes** counts the number of bytes of link layer packets sent via this face.
315
  This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.
316 98 Davide Pesavento
* **Flags** contains these bitfields: *LocalFieldsEnabled*, *LpReliabilityEnabled*, *CongestionMarkingEnabled*.
317 108 Davide Pesavento
  See "face properties" for more information.
318 37 Junxiao Shi
319 84 Davide Pesavento
### Query operation
320 1 Junxiao Shi
321 37 Junxiao Shi
The query operation allows one to retrieve a subset of face dataset that contains faces satisfying a filter.
322
323
To run a query, the consumer should express an Interest with Name: `ndn:/localhost/nfd/faces/query/<filter>`, where `<filter>` is a **FaceQueryFilter** block that specifies zero or more conditions.
324
325 116 Davide Pesavento
    FaceQueryFilter = FACE-QUERY-FILTER-TYPE TLV-LENGTH
326
                        [FaceId]
327
                        [UriScheme]
328
                        [Uri]
329
                        [LocalUri]
330
                        [FaceScope]
331
                        [FacePersistency]
332
                        [LinkType]
333 37 Junxiao Shi
    
334 117 Davide Pesavento
    UriScheme       = URI-SCHEME-TYPE TLV-LENGTH UTF-8-STRING
335 37 Junxiao Shi
336 40 Junxiao Shi
* **FaceId** permits a face if its FaceId equals the value
337
* **UriScheme** permits a face if the scheme part of its local FaceUri or remote FaceUri equals the value
338
* **Uri** permits a face if its remote FaceUri equals the value
339 1 Junxiao Shi
* **LocalUri** permits a face if its local FaceUri equals the value
340
* **FaceScope** permits a face if its *FaceScope* attribute equals the value
341 39 Junxiao Shi
* **FacePersistency** permits a face if its *FacePersistency* attribute equals the value
342 37 Junxiao Shi
* **LinkType** permits a face if its *LinkType* attribute equals the value
343
344 1 Junxiao Shi
A face must satisfy ALL conditions to satisfy the filter.
345 37 Junxiao Shi
Faces that satisfy the filter are represented by **FaceStatus** blocks, and published as a [[StatusDataset]] under the Interest Name (a Data packet's Name would be `ndn:/localhost/nfd/faces/query/<filter>/<version>/<segment>`).
346 41 Junxiao Shi
347 1 Junxiao Shi
Examples of filters:
348 75 Davide Pesavento
349
* a specific face: `FaceId=260`
350
* a specific TCP tunnel: `Uri=tcp4://192.0.2.1:6363`  
351
  (note: FaceUri must precisely match the canonical form: use either "tcp4" or "tcp6" instead of "tcp", use IP address instead of domain name, include port number)
352
* all TCP tunnels: `UriScheme=tcp`  
353
  (note: "tcp" permits both "tcp4" and "tcp6", "udp" permits both "udp4" and "udp6")
354
* all UDP multi-access faces: `UriScheme=udp` && `LinkType=multi-access`
355
* all Ethernet faces: `UriScheme=ether`  
356 1 Junxiao Shi
  (note: UriScheme matches against both local and remote FaceUri, "dev" also works)
357 75 Davide Pesavento
* all faces: no condition  
358 33 Junxiao Shi
  (note: this is equivalent to face dataset, and face dataset should be preferred for this purpose)
359
360
## Channel Dataset
361 20 Junxiao Shi
362 1 Junxiao Shi
Description of all active channels is published as a [[StatusDataset|Status Dataset]] at `ndn:/localhost/nfd/faces/channels`.
363
364 20 Junxiao Shi
Each channel is represented by a **ChannelStatus** block:
365
366 116 Davide Pesavento
    ChannelStatus = CHANNEL-STATUS-TYPE TLV-LENGTH
367
                      LocalUri
368 83 Davide Pesavento
369 21 Alex Afanasyev
* **LocalUri** is a FaceUri representing the channel's local endpoint.
370 37 Junxiao Shi
371
## Face Status Change Notification
372
373 1 Junxiao Shi
Face status change events are published as a [[Notification|Notification Stream]] at `ndn:/localhost/nfd/faces/events`.
374 37 Junxiao Shi
Notifications of all faces are sent into the same notification stream.
375 83 Davide Pesavento
376 23 Alex Afanasyev
The Content of each notification Data packet is a **FaceEventNotification** block:
377 37 Junxiao Shi
378 116 Davide Pesavento
    FaceEventNotification = FACE-EVENT-NOTIFICATION-TYPE TLV-LENGTH
379
                              FaceEventKind
380
                              FaceId
381
                              Uri
382
                              LocalUri
383
                              FaceScope
384
                              FacePersistency
385
                              LinkType
386
                              Flags
387 9 Junxiao Shi
    
388 118 Davide Pesavento
    FaceEventKind         = FACE-EVENT-KIND-TYPE TLV-LENGTH NonNegativeInteger
389 9 Junxiao Shi
390 1 Junxiao Shi
**FaceEventKind** indicates the kind of event. Its possible values are:
391 34 Junxiao Shi
392 83 Davide Pesavento
* 1 = face is created
393
* 2 = face is destroyed
394
* 3 = face goes UP (from DOWN state)
395
* 4 = face goes DOWN (from UP state)
396 32 Junxiao Shi
397 20 Junxiao Shi
## TLV-TYPE assignments
398
399
Type                                        | Assigned value    | Assigned value (hex)
400 39 Junxiao Shi
------------------------------------------- | ----------------- | --------------------
401 40 Junxiao Shi
FaceStatus                                  | 128               | 0x80
402
LocalUri                                    | 129               | 0x81
403
ChannelStatus                               | 130               | 0x82
404 75 Davide Pesavento
UriScheme                                   | 131               | 0x83
405 1 Junxiao Shi
FaceScope                                   | 132               | 0x84
406
FacePersistency                             | 133               | 0x85
407
LinkType                                    | 134               | 0x86
408 74 Eric Newberry
BaseCongestionMarkingInterval               | 135               | 0x87
409 1 Junxiao Shi
DefaultCongestionThreshold                  | 136               | 0x88
410 85 Eric Newberry
Mtu                                         | 137               | 0x89
411 67 Junxiao Shi
NInInterests                                | 144               | 0x90
412 48 Junxiao Shi
NInData                                     | 145               | 0x91
413 1 Junxiao Shi
NInNacks                                    | 151               | 0x97
414 67 Junxiao Shi
NOutInterests                               | 146               | 0x92
415 1 Junxiao Shi
NOutData                                    | 147               | 0x93
416
NOutNacks                                   | 152               | 0x98
417
NInBytes                                    | 148               | 0x94
418 39 Junxiao Shi
NOutBytes                                   | 149               | 0x95
419 1 Junxiao Shi
FaceQueryFilter                             | 150               | 0x96
420
FaceEventNotification                       | 192               | 0xc0
421
FaceEventKind                               | 193               | 0xc1
422
(reserved, formerly FaceFlags)              | 194               | 0xc2