Prefix Announcement Protocol¶

The prefix announcement protocol allows registering prefixes using a prefix announcement object. It is an alternative to NFD RIB Management protocol's rib/register verb.

Prefix Announcement object¶

The prefix announcement object is a Data packet that represents an application's intent of registering a prefix toward itself. A Data packet that satisfies the following requirements is a prefix announcement object:

• Name starts with the announced prefix, followed by a fixed prefix-announcement generic name component, followed by a version component and a segment component as defined by the NDN Naming Conventions. In this specification revision, segment number is always zero.
• ContentType is "prefix announcement".
• Content contains a sequence of TLV elements, including at least an ExpirationPeriod element. Ordering of these TLV elements is insignificant. Unrecognized non-critical TLV elements are permitted and will be ignored.

Validity period of a prefix announcement object is given in ExpirationPeriod and ValidityPeriod elements in its Content.

• ExpirationPeriod gives the duration for which the prefix announcement remains valid. The duration begins when a node or program receives the prefix announcement. This element is required.
• ValidityPeriod gives the absolute time range in which the prefix announcement remains valid. It is ignored if the receiving node does not have a UnixTime clock. This element is optional.
• When both ValidityPeriod and ExpirationPeriod are present, the most restricted constraint applies.

Trust model of prefix announcement is to be defined by the application.

Example¶

Data
  Name /net/example/prefix-announcement/%FD%01/%00%00
  MetaInfo
    ContentType "prefix announcement"
  Content
    ValidityPeriod
      NotBefore 20181030T000000Z
      NotAfter  20181124T235959Z
    ExpirationPeriod 3600000
  SignatureInfo
  SignatureValue 

This prefix announcement object announces the prefix /net/example.
It is valid for one hour since receipt, within the date range 30OCT2018 and 24NOV2018.

Command Verbs¶

'announce'¶

This command announces a prefix using a prefix announcement object.
NFD-RIB accepts this command as a Command Interest with the following syntax:

/localhost/nfd/rib/announce/<params-sha256>/<command-interest-components>
/localhop/nfd/rib/announce/<params-sha256>/<command-interest-components>

The Interest's Parameters element carries the prefix announcement object.

NFD-RIB converts this command into an equivalent rib/register command. Route origin is set to "prefix announcement" (number 129).
Response is the same as rib/register command.

'unannounce'¶

There is no 'unannounce' command. Instead, use rib/unregister command.