Project

General

Profile

Actions
History

Management »

FaceMgmt » History » Revision 49

« Previous | Revision 49/118 (diff) | Next »
Junxiao Shi, 09/11/2015 03:56 AM

Face Management

Face Management is a module of NFD Management protocol.
It provides:

  • commands to create and destroy faces
  • commands to enable and disable LocalControlHeader features on a face
  • a dataset of description of all active faces and their counters
  • a dataset of description of all active channels
  • a notification stream for face creating and destroying events

Face Management commands, datasets, and notifications are available under namespace ndn:/localhost/nfd/faces.

FaceUri

A FaceUri represents the underlying protocol and address used by a Face.

Every Face has two FaceUris: one for local endpoint, and the other for remote endpoint.

UDP

udp[4|6]://<IP-or-host>[:<port>]

Examples:

  • udp4://192.0.2.1:6363 (canonical form)
  • udp6://[2001:db8::1]:6363 (canonical form)
  • udp://192.0.2.1 (remote-port defaults to 6363)
  • udp://example.net:6363
  • udp4://example.net:6363 (resolve hostname to IPv4 address only)
  • udp6://example.net:6363 (resolve hostname to IPv6 address only)
  • udp4://224.0.23.170:56363 (multicast, canonical form)

TCP

tcp[4|6]://<IP-or-host>[:<port>]

Examples:

  • tcp4://192.0.2.1:6363 (canonical form)
  • tcp6://[2001:db8::1]:6363 (canonical form)
  • tcp://192.0.2.1 (remote-port defaults to 6363)
  • tcp://example.net:6363
  • tcp4://example.net:6363 (resolve hostname to IPv4 address only)
  • tcp6://example.net:6363 (resolve hostname to IPv6 address only)

UNIX stream

unix://<path>

Examples:

  • unix:///var/run/nfd.sock (note there are three forward-slashes after 'unix')

File Descriptor

fd://<file-descriptor>

Examples:

  • fd://6

Ethernet

ether://[<MAC>]

Examples:

  • ether://[08:00:27:01:01:01]
  • ether://[33:33:01:01:01:01] (multicast)

Network Device

dev://<ifname>

Examples:

  • dev://eth0

Underlying protocol and FaceUri scheme

Underlying protocol remote FaceUri scheme local FaceUri scheme
IPv4 UDP unicast udp4 udp4
IPv6 UDP unicast udp6 udp6
IPv4 UDP multicast udp4 (multicast IP) udp4 (local IP, same port)
IPv4 TCP tcp4 tcp4
IPv6 TCP tcp6 tcp6
UNIX stream fd (file descriptor on NFD side) unix (socket path)
Ethernet multicast ether dev

Static Face Attributes

FaceScope indicates whether the face is local for scope control purposes.

  • non-local(=0)
  • local(=1)

FacePersistency indicates whether the face is persistent.

  • on-demand(=1), face closes if it remains idle for some time
  • persistent(=0), face remains open until it's explicitly destroyed or there's a transport failure
  • permanent(=2), face remains open until it's explicitly destroyed; transport failures will be recovered internally

LinkType indicates the type of communication link.

  • point-to-point(=0), communication with one peer
  • multi-access(=1), communication with a multicast group

Control Commands

ControlCommand management-module: faces

Create a face

command-verb: create

ControlParameters fields:

  • Uri (required): a canonical UDP unicast or TCP FaceUri
  • FacePersistency (optional): either persistent or permanent; creating on-demand faces is disallowed.
    The default is persistent.
    See "static face attributes" for more information.

This command allows creation of UDP unicast and TCP faces only.

If another face with same underlying protocol and remote address exists, the command is considered successful, and FaceId of that face is returned;
If the existing face has a different FacePersistency property, the transition on the direction of on-demand -> persistent -> permanent is allowed.

If the command succeeds, <Body> in ControlResponse block contains updated ControlParameters:

  • FaceId
  • FacePersistency

Destroy a face

command-verb: destroy

ControlParameters fields:

  • FaceId (required)

If the specified face does not exist, this command does nothing, but is still considered successful.

Enable a LocalControlHeader feature

command-verb: enable-local-control

ControlParameters fields:

  • LocalControlFeature (required): 1=IncomingFaceId, 2=NextHopFaceId, 3=CachingPolicy

This command can only operate on the requesting face.

Disable a LocalControlHeader feature

command-verb: disable-local-control

ControlParameters fields:

  • LocalControlFeature (required): 1=IncomingFaceId, 2=NextHopFaceId, 3=CachingPolicy

This command can only operate on the requesting face.

Face Dataset

Description and counters of all active faces are published as a Status Dataset at ndn:/localhost/nfd/faces/list.

Each face is represented by a FaceStatus block:

FaceStatus      ::= FACE-STATUS-TYPE TLV-LENGTH
                      FaceId
                      Uri (remote FaceUri)
                      LocalUri
                      ExpirationPeriod?
                      FaceScope
                      FacePersistency
                      LinkType
                      NInInterests
                      NInDatas
                      NInNacks
                      NOutInterests
                      NOutDatas
                      NOutNacks
                      NInBytes
                      NOutBytes

Uri             ::= URI-TYPE TLV-LENGTH
                      FaceUri in UTF-8 encoding

LocalUri        ::= LOCAL-URI-TYPE TLV-LENGTH
                      FaceUri in UTF-8 encoding

; other TLVs have nonNegativeInteger as value
  • Uri is a FaceUri representing remote endpoint.
  • LocalUri is a FaceUri representing local endpoint.
  • ExpirationPeriod is the remaining lifetime of this face. If this field is omitted, the face has infinite lifetime. Currently, this is applicable to on-demand datagram faces only.
  • FaceScope indicates whether the face is local for scope control purposes. See "static face attributes" for more information.
  • FacePersistency indicates whether the face is persistent. See "static face attributes" for more information.
  • LinkType indicates the type of communication link See "static face attributes" for more information.
  • NInInterests: number of incoming Interest packets since the face is established.
  • NInDatas counts the number of incoming Data packets since the face is established.
  • NInNacks counts the number of incoming Nack packets since the face is established.
  • NOutInterests counts the number of outgoing Interest packets since the face is established.
  • NOutDatas counts the number of outgoing Data packets since the face is established.
  • NOutNacks counts the number of outgoing Nack packets since the face is established.
  • NInBytes counts the number of bytes of link layer packets received via this face. This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.
  • NOutBytes counts the number of bytes of link layer packets sent via this face. This counter is initialized to zero when the face is established, and can wrap around after overflowing unsigned 64-bit integer range.

Query Operation

The query operation allows one to retrieve a subset of face dataset that contains faces satisfying a filter.

To run a query, the consumer should express an Interest with Name: ndn:/localhost/nfd/faces/query/<filter>, where <filter> is a FaceQueryFilter block that specifies zero or more conditions.

FaceQueryFilter ::= FACE-QUERY-FILTER-TYPE TLV-LENGTH
                      FaceId?
                      UriScheme?
                      Uri?
                      LocalUri?
                      FaceScope?
                      FacePersistency?
                      LinkType?

UriScheme       ::= URI-SCHEME-TYPE TLV-LENGTH
                      string in UTF-8
  • FaceId permits a face if its FaceId equals the value
  • UriScheme permits a face if the scheme part of its local FaceUri or remote FaceUri equals the value
  • Uri permits a face if its remote FaceUri equals the value
  • LocalUri permits a face if its local FaceUri equals the value
  • FaceScope permits a face if its FaceScope attribute equals the value
  • FacePersistency permits a face if its FacePersistency attribute equals the value
  • LinkType permits a face if its LinkType attribute equals the value

A face must satisfy ALL conditions to satisfy the filter.
Faces that satisfy the filter are represented by FaceStatus blocks, and published as a StatusDataset under the Interest Name (a Data packet's Name would be ndn:/localhost/nfd/faces/query/<filter>/<version>/<segment>).

Examples of filters:

  • a specific face: FaceId=260
  • a specific TCP tunnel: Uri=tcp4://192.0.2.1:6363
    note: FaceUri must precisely match the canonical form: use either "tcp4" or "tcp6" instead of "tcp", use IP address instead of DNS name, include port number
  • all TCP tunnels: UriScheme=tcp
    note: "tcp" permits both "tcp4" and "tcp6", "udp" permits both "udp4" and "udp6"
  • all UDP multicast faces: UriScheme=udp & LinkType=multi-access
  • all Ethernet faces: UriScheme=ether note: UriScheme matches on both local and remote FaceUri, "dev" also works
  • all faces: no condition
    note: this is equivalent to face dataset, and face dataset should be preferred for this purpose

Channel Dataset

Description of all active channels is published as a Status Dataset at ndn:/localhost/nfd/faces/channels.

Each channel is represented by a ChannelStatus block:

ChannelStatus    := CHANNEL-STATUS-TYPE TLV-LENGTH
                      LocalUri
  • LocalUri is a FaceUri representing local endpoint.

Face Status Change Notification

Face status change events are published as a Notification Stream at ndn:/localhost/nfd/faces/events.
Notifications of all faces are sent into the same notification stream.

The Content of each notification Data packet is a FaceEventNotification block:

FaceEventNotification ::= FACE-EVENT-NOTIFICATION-TYPE TLV-LENGTH
                            FaceEventKind
                            FaceId
                            Uri
                            LocalUri
                            FaceScope
                            FacePersistency
                            LinkType

FaceEventKind         ::= FACE-EVENT-KIND-TYPE TLV-LENGTH
                            nonNegativeInteger

FaceEventKind indicates the kind of event. Its possible values are:

  • 1: face is created
  • 2: face is destroyed

TLV-TYPE assignments

Type Assigned value Assigned value (hex)
FaceStatus 128 0x80
LocalUri 129 0x81
ChannelStatus 130 0x82
FaceScope 132 0x84
FacePersistency 133 0x85
LinkType 134 0x86
NInInterests 144 0x90
NInDatas 145 0x91
NInNacks 151 0x97
NOutInterests 146 0x92
NOutDatas 147 0x93
NOutNacks 152 0x98
NInBytes 148 0x94
NOutBytes 149 0x95
FaceQueryFilter 150 0x96
UriScheme 131 0x83
FaceEventNotification 192 0xc0
FaceEventKind 193 0xc1
(reserved, formerly FaceFlags) 194 0xc2

Updated by Junxiao Shi over 8 years ago · 49 revisions