ControlCommand » History » Version 34
Junxiao Shi, 01/09/2018 08:22 AM
| 1 | 34 | Junxiao Shi | |
|---|---|---|---|
| 2 | 13 | Junxiao Shi | # Control Command |
| 3 | 1 | Junxiao Shi | |
| 4 | 29 | Davide Pesavento | **Control Command** is a mechanism of [[Management|NFD Management protocol]]. This mechanism is useful for altering the state of the forwarder. |
| 5 | 28 | Davide Pesavento | This document defines the request and response format of such commands, and how they should be signed and authenticated. |
| 6 | 1 | Junxiao Shi | |
| 7 | ## Request format |
||
| 8 | 9 | Anonymous | |
| 9 | 26 | Junxiao Shi | Control commands are [[ndn-cxx:CommandInterest|Command Interests]] under a NFD management prefix. |
| 10 | 1 | Junxiao Shi | |
| 11 | 22 | Junxiao Shi | The Name for a request Interest has the following form: |
| 12 | 1 | Junxiao Shi | |
| 13 | 26 | Junxiao Shi | /<prefix>/<management-module>/<command-verb>/<control-parameters>/<command-interest-components> |
| 14 | 1 | Junxiao Shi | |
| 15 | 23 | Junxiao Shi | * *prefix* is a NFD management prefix. |
| 16 | Unless otherwise noted, all commands use `/localhost/nfd` prefix. |
||
| 17 | Each individual command MAY specify additional prefixes under which that command could be accepted. |
||
| 18 | 22 | Junxiao Shi | * *management-module* is the name of management module to which the command needs to be dispatched. |
| 19 | * *command-verb* is the command to be executed. |
||
| 20 | * *control-parameters* is a ControlParameters TLV block wrapped in a NameComponent. |
||
| 21 | 26 | Junxiao Shi | * *command-interest-components* are four additional components defined by [[ndn-cxx:CommandInterest|Command Interest]] spec. |
| 22 | 1 | Junxiao Shi | |
| 23 | 13 | Junxiao Shi | ### ControlParameters |
| 24 | 1 | Junxiao Shi | |
| 25 | 13 | Junxiao Shi | ControlParameters block contains arguments to the command. |
| 26 | 1 | Junxiao Shi | |
| 27 | 14 | Junxiao Shi | ControlParameters ::= CONTROL-PARAMETERS-TYPE TLV-LENGTH |
| 28 | Name? |
||
| 29 | FaceId? |
||
| 30 | 1 | Junxiao Shi | Uri? |
| 31 | 30 | Alex Afanasyev | LocalUri? |
| 32 | 14 | Junxiao Shi | Origin? |
| 33 | 19 | Junxiao Shi | Cost? |
| 34 | 34 | Junxiao Shi | Capacity? |
| 35 | 1 | Junxiao Shi | Flags? |
| 36 | 26 | Junxiao Shi | Mask? |
| 37 | 17 | Junxiao Shi | Strategy? |
| 38 | ExpirationPeriod? |
||
| 39 | 24 | Junxiao Shi | FacePersistency? |
| 40 | 1 | Junxiao Shi | |
| 41 | 24 | Junxiao Shi | ; Name is defined in NDN packet format specification |
| 42 | 13 | Junxiao Shi | |
| 43 | 14 | Junxiao Shi | FaceId ::= FACE-ID-TYPE TLV-LENGTH |
| 44 | nonNegativeInteger |
||
| 45 | 13 | Junxiao Shi | |
| 46 | 14 | Junxiao Shi | Uri ::= URI-TYPE TLV-LENGTH |
| 47 | RFC3986 URI in UTF-8 encoding |
||
| 48 | 30 | Alex Afanasyev | |
| 49 | LocalUri ::= LOCAL-URI-TYPE TLV-LENGTH |
||
| 50 | 31 | Alex Afanasyev | RFC3986 URI in UTF-8 encoding |
| 51 | 13 | Junxiao Shi | |
| 52 | 19 | Junxiao Shi | Origin ::= ORIGIN-TYPE TLV-LENGTH |
| 53 | 17 | Junxiao Shi | nonNegativeInteger |
| 54 | 1 | Junxiao Shi | |
| 55 | Cost ::= COST-TYPE TLV-LENGTH |
||
| 56 | nonNegativeInteger |
||
| 57 | 34 | Junxiao Shi | |
| 58 | Capacity ::= CAPACITY-TYPE TLV-LENGTH |
||
| 59 | nonNegativeInteger |
||
| 60 | 17 | Junxiao Shi | |
| 61 | 1 | Junxiao Shi | Flags ::= FLAGS-TYPE TLV-LENGTH |
| 62 | nonNegativeInteger |
||
| 63 | |||
| 64 | 26 | Junxiao Shi | Mask ::= MASK-TYPE TLV-LENGTH |
| 65 | nonNegativeInteger |
||
| 66 | |||
| 67 | 17 | Junxiao Shi | Strategy ::= STRATEGY-TYPE TLV-LENGTH |
| 68 | Name |
||
| 69 | |||
| 70 | ExpirationPeriod ::= EXPIRATION-PERIOD-TYPE TLV-LENGTH |
||
| 71 | 1 | Junxiao Shi | nonNegativeInteger |
| 72 | 24 | Junxiao Shi | |
| 73 | 26 | Junxiao Shi | ; FacePersistency is defined in FaceMgmt section |
| 74 | 24 | Junxiao Shi | |
| 75 | 1 | Junxiao Shi | This definition exhausts all possible fields used in existing commands. |
| 76 | 13 | Junxiao Shi | |
| 77 | 1 | Junxiao Shi | Each individual command MUST specify: |
| 78 | 13 | Junxiao Shi | |
| 79 | * a list of required fields: those fields MUST be present |
||
| 80 | * a list of optional fields: those fields MAY be present |
||
| 81 | 28 | Davide Pesavento | * the semantics of each required and optional field |
| 82 | 13 | Junxiao Shi | |
| 83 | 1 | Junxiao Shi | A field that is neither required nor optional for a command MUST NOT be present in a ControlParameter given to that command. |
| 84 | |||
| 85 | 17 | Junxiao Shi | Each individual command MAY impose additional constraints on certain fields. |
| 86 | 1 | Junxiao Shi | |
| 87 | ## Response format |
||
| 88 | |||
| 89 | A response from the command interface is a Data that matches the request Interest. |
||
| 90 | 13 | Junxiao Shi | The payload of this Data is a ControlResponse block. |
| 91 | 1 | Junxiao Shi | |
| 92 | ControlResponse ::= CONTROL-RESPONSE-TYPE TLV-LENGTH |
||
| 93 | StatusCode |
||
| 94 | StatusText |
||
| 95 | 26 | Junxiao Shi | <body> |
| 96 | 1 | Junxiao Shi | |
| 97 | StatusCode ::= STATUS-CODE-TYPE TLV-LENGTH |
||
| 98 | nonNegativeInteger |
||
| 99 | |||
| 100 | 13 | Junxiao Shi | StatusText ::= STATUS-TEXT-TYPE TLV-LENGTH |
| 101 | 2 | Junxiao Shi | string in UTF-8 |
| 102 | 1 | Junxiao Shi | |
| 103 | 20 | Junxiao Shi | <body> ::= zero or more arbitrary TLV blocks |
| 104 | 1 | Junxiao Shi | |
| 105 | 13 | Junxiao Shi | ### StatusCode |
| 106 | 2 | Junxiao Shi | |
| 107 | 28 | Davide Pesavento | StatusCode loosely follows the HTTP semantics described in [RFC 7231](https://tools.ietf.org/html/rfc7231#section-6). |
| 108 | 16 | Junxiao Shi | |
| 109 | 28 | Davide Pesavento | * Codes between 100 and 399 represent a success. |
| 110 | * Codes between 400 and 499 represent a client error. |
||
| 111 | * Codes between 500 and 599 represent a server error. |
||
| 112 | 16 | Junxiao Shi | |
| 113 | 13 | Junxiao Shi | Common codes include: |
| 114 | 1 | Junxiao Shi | |
| 115 | StatusCode | Description |
||
| 116 | -----------|------------------------ |
||
| 117 | 13 | Junxiao Shi | 200 | OK |
| 118 | 2 | Junxiao Shi | 400 | ControlParameters is incorrect |
| 119 | 16 | Junxiao Shi | 403 | Command Interest is not authorized |
| 120 | 28 | Davide Pesavento | 404 | Resource (e.g., face, prefix, ...) not found |
| 121 | 19 | Junxiao Shi | 501 | Module or verb is not supported |
| 122 | 503 | Service not available |
||
| 123 | 1 | Junxiao Shi | |
| 124 | Each individual command MAY define additional codes. |
||
| 125 | 13 | Junxiao Shi | |
| 126 | 1 | Junxiao Shi | ### \<body> |
| 127 | 13 | Junxiao Shi | |
| 128 | 2 | Junxiao Shi | Additional elements are allowed at the end of ControlResponse. |
| 129 | 13 | Junxiao Shi | |
| 130 | 1 | Junxiao Shi | Each individual command MAY define the type and meaning of \<body>. |
| 131 | 14 | Junxiao Shi | |
| 132 | 1 | Junxiao Shi | Unless otherwise defined by an individual command, |
| 133 | 14 | Junxiao Shi | \<body> is the ControlParameters passed into this command for all successful responses, |
| 134 | and \<body> is empty for all failure responses. |
||
| 135 | 1 | Junxiao Shi | |
| 136 | ## TLV-TYPE assignments |
||
| 137 | 13 | Junxiao Shi | |
| 138 | 1 | Junxiao Shi | Type | Assigned value | Assigned value (hex) |
| 139 | 13 | Junxiao Shi | ------------------------------------------- | ----------------- | -------------------- |
| 140 | 1 | Junxiao Shi | ControlParameters | 104 | 0x68 |
| 141 | 13 | Junxiao Shi | FaceId | 105 | 0x69 |
| 142 | 1 | Junxiao Shi | Uri | 114 | 0x72 |
| 143 | 33 | Alex Afanasyev | LocalUri | 129 | 0x81 |
| 144 | 13 | Junxiao Shi | Origin | 111 | 0x6f |
| 145 | 19 | Junxiao Shi | Cost | 106 | 0x6a |
| 146 | 34 | Junxiao Shi | Capacity | 131 | 0x83 |
| 147 | 1 | Junxiao Shi | Flags | 108 | 0x6c |
| 148 | 26 | Junxiao Shi | Mask | 112 | 0x70 |
| 149 | 5 | Alex Afanasyev | Strategy | 107 | 0x6b |
| 150 | 1 | Junxiao Shi | ExpirationPeriod | 109 | 0x6d |
| 151 | 24 | Junxiao Shi | ControlResponse | 101 | 0x65 |
| 152 | 5 | Alex Afanasyev | StatusCode | 102 | 0x66 |
| 153 | 13 | Junxiao Shi | StatusText | 103 | 0x67 |
| 154 | 26 | Junxiao Shi | (reserved, formerly LocalControlFeature) | 110 | 0x6e |