Bug #2492
closed
Packet processing delays in NFD
Added by Jeff Burke almost 10 years ago. Updated almost 7 years ago.
0%
Description
ndnrtc application development has identified repeatable packet processing delays in NFD of 250-500ms occurring nominally every 2-3 minutes, for reasonable CPU load, bandwidths in the 150-1000 kbps range, and in the presence of no other network traffic on a switched gigabit LAN. These stop all packet flow and cause audio/video interruptions that are unacceptable for end-user QoE.
More details can be found in recent mailing list threads and conversations with Davide. (I will leave it to others to post them here.)
Debugging the current installation where this problem is occurring is requested.
Files
| IMG_5708.JPG.jpeg (661 KB) IMG_5708.JPG.jpeg | Peter Gusev, 02/09/2015 10:57 AM | ||
| Archive.zip (7.34 KB) Archive.zip | Peter Gusev, 02/17/2015 01:15 PM |
Updated by Davide Pesavento almost 10 years ago
- Start date deleted (
02/08/2015)
Comparing the pcap and NFD logs, Peter and I discovered that the "delayed" packets are actually received by the kernel without any delays. However NFD does not read the packets from the socket until much later (~200-400ms later). We conjectured that during that time NFD was busy doing something else and didn't re-enter the io_service event loop, therefore it was not notified of pending packets. (@Peter, if you still have a pic of the timing diagram you drew, please attach it here)
Unfortunately all logging except for UdpFace and Forwarder was turned off, thus we don't know what was going on exactly. Alex suspects some data signing operations caused by the notification stream or other management operations. It was suggested to use the "file" TPM backend in order to prove or disprove this theory. It would also be beneficial to set the default log level to INFO (at least), unless it causes performance problems.
Another possibility is that the problem might be in the kernel or in Boost.Asio, but this seems less likely.
Updated by Jeff Burke almost 10 years ago
We will attempt to test the TPM setting change prior to the 1P NFD conference call on Monday.
Updated by Junxiao Shi almost 10 years ago
According to #1589 note-1, each signing operation using OSX KeyChain takes less than 20ms.
A 250ms delay, if caused by OSX KeyChain signing, means signing more than 12 packets.
I can't think of why NFD Management would need to sign 12 packets in a row.
Can we add a logger call just before io_service::run call, so that we can know whether NFD entered the IO loop?
Updated by Davide Pesavento almost 10 years ago
Junxiao Shi wrote:
According to #1589 note-1, each signing operation using OSX KeyChain takes less than 20ms.
A 250ms delay, if caused by OSX KeyChain signing, means signing more than 12 packets.
I can't think of why NFD Management would need to sign 12 packets in a row.
I know, but it's the only semi-plausible idea we had so far. We thought about the CS too, but that also doesn't really make sense.
Can we add a logger call just before
io_service::runcall, so that we can know whether NFD entered the IO loop?
Not sure what you mean here... The event loop is re-entered whenever a callback finishes its execution, so there isn't a single entry point.
Updated by Junxiao Shi almost 10 years ago
According to #1589 note-1, each signing operation using OSX KeyChain takes less than 20ms.
A 250ms delay, if caused by OSX KeyChain signing, means signing more than 12 packets.
I can't think of why NFD Management would need to sign 12 packets in a row.I know, but it's the only semi-plausible idea we had so far. We thought about the CS too, but that also doesn't really make sense.
After NFD Management signs some packet, it will send the packet into forwarding pipelines.
With 'Forwarder DEBUG' log level, the Name of that packet will appear in the log.
Do you see any management generated packet Name (starts with /localhost) near the log line of problematic NdnCon packets?
Can we add a logger call just before
io_service::runcall, so that we can know whether NFD entered the IO loop?Not sure what you mean here... The event loop is re-entered whenever a callback finishes its execution, so there isn't a single entry point.
I was thinking about tracing the io.run() call in main function, but now I know it won't work.
Updated by Peter Gusev almost 10 years ago
- File IMG_5708.JPG.jpeg IMG_5708.JPG.jpeg added
Here is the diagram we draw with Davide. Also, log level was set to NONE, except UdpFace (TRACE) and Forwarder (DEBUG).
Can anyone point me to the documentation on how to set a file tpm in nfd.conf? Can't find it in the conf file.
Updated by Peter Gusev almost 10 years ago
Peter Gusev wrote:
Here is the diagram we draw with Davide. Also, log level was set to NONE, except UdpFace (TRACE) and Forwarder (DEBUG).
Can anyone point me to the documentation on how to set a file tpm in nfd.conf? Can't find it in the conf file.
Ok, figured this out (/usr/local/etc/ndn/client.conf).
Updated by Peter Gusev almost 10 years ago
Getting "ERROR: private key doesn't exist" after trying to register a prefix using nfdc (nfdc register /ndn/edu/ucla/remap udp://131.179.141.33).
Updated by Jeff Burke almost 10 years ago
How are you installing NDN (source or macports)?
I don't know where the PIB (ndnsec-public-info.db) is in your installation... in mine it is in .ndn and I think needs to be deleted, and then re-run the default certificate generation steps.
Can the nfd folks advise?
Updated by Peter Gusev almost 10 years ago
Ok, figured out.
Simply had to re-run these steps:
; 1. Generate and install a self-signed identity certificate:
;
; ndnsec-keygen /whoami | ndnsec-install-cert -
;
; Note that the argument to ndnsec-key will be the identity name of the
; new key (in this case, /your-username). Identities are hierarchical NDN
; names and may have multiple components (e.g. /ndn/ucla/edu/alice).
; You may create additional keys and identities as you see fit.
;
; 2. Dump the NDN certificate to a file:
;
; sudo mkdir -p /usr/local/etc/ndn/keys/
; ndnsec-cert-dump -i /whoami > default.ndncert
; sudo mv default.ndncert /usr/local/etc/ndn/keys/default.ndncert
Updated by Alex Afanasyev almost 10 years ago
If from sources, then ndnsec-public-info.db is in your home directory ~/.ndn. For brew, nrd and nfd have their own homes, which are in /usr/local/var/lib/ndn/*. Similar to macports, but different path: /opt/local/var/lib/ndn/*. In both macports and brew, nfd and nrd already use file-based tpm.
Updated by Peter Gusev almost 10 years ago
Updated by Davide Pesavento almost 10 years ago
Can you set the default log level to DEBUG (or INFO) or does it become too slow? It's really hard to figure out what was going on without the rest of the log output.
Updated by Junxiao Shi almost 10 years ago
- Target version changed from v0.2 to v0.3
20150209 conference call decides that @Peter should do the following two experiments:
- upgrade the router node to NFD git-HEAD version and keep using Macbook, and determine whether the bug exists
- keep existing consumer and producer nodes, since @Davide has determined that the problem isn't with them
- replace the router node with a linux machine running NFD git-HEAD version, and determine whether the bug exists
- keep existing consumer and producer nodes, since @Davide has determined that the problem isn't with them
If either experiment turns out to have the bug, we'll try to reproduce the problem in our environment.
If both experiments do not have the bug, and you are still curious why it was happening, please use this procedure to find out which commit fixed the bug, and we'll try to explain.
Updated by Jeff Burke almost 10 years ago
We can do option one (NFD v0.3 on MacOS X).
Can you provide a Linux box for option two that we can temporarily use at the hub?
Again, we strongly request your help debugging this in situ, not reproducing this in your environments.
Updated by Jeff Burke almost 10 years ago
Just so it's clear, we're not "curious" about the bug source. This is a block on deployment of ndnrtc and we are asking for help to determine the root cause, not solving the symptom.
Updated by Junxiao Shi almost 10 years ago
Can you provide a Linux box for option two that we can temporarily use at the hub?
Results from both experiments are needed.
You may use the testbed gateway router. Not being in the same subnet shouldn't affect the result.
Again, we strongly request your help debugging this in situ, not reproducing this in your environments.
If the problem isn't reproducible in any other machine or with any other application, it's not a NFD bug.
Updated by Jeff Burke almost 10 years ago
Just because it is not reproducible in your environment does not disqualify the bug. (This is the whole point of doing deployments.)
We are testing some different log settings first, then will do NFD v0.3 on MacOS X. Testing on a testbed hub is not equivalent (changing too many variables) - we will come up with a Linux box.
Updated by Alex Afanasyev almost 10 years ago
Just because it is not reproducible in your environment does not disqualify the bug. (This is the whole point of doing deployments.)
Even though it does not disqualify the bug, it points out a possibility that the cause for the bug is external to NFD. I'm not saying it is, just explaining why it is important to have a reproducible environment to dig out the error.
Updated by Davide Pesavento almost 10 years ago
Alex Afanasyev wrote:
Even though it does not disqualify the bug, it points out a possibility that the cause for the bug is external to NFD. I'm not saying it is, just explaining why it is important to have a reproducible environment to dig out the error.
The point is, Peter already has an environment where the phenomenon is consistently reproducible. What else do you want?
Updated by Peter Gusev almost 10 years ago
I've run two more tests on the existing setup before updating intermediate hub to NFD 0.3.0.
This time, I run 1st test with default_level NONE and second test with default_level INFO. The problems seems to almost go away - only in the 1st run I have a pattern similar to the problem:
NFD1:
1423522455.985196 DEBUG: [Forwarder] onIncomingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
1423522455.985518 DEBUG: [Forwarder] onOutgoingInterest face=263 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
^ 0 sec, 522.150 msec
1423522456.507346 DEBUG: [Forwarder] onIncomingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
^ 0 sec, 14.508 msec
1423522456.521854 DEBUG: [Forwarder] onOutgoingInterest face=263 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
^ 2 sec, 2482.376 msec
1423522459.004230 DEBUG: [Forwarder] onIncomingData face=263 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00/2/7316/243/0
1423522459.004545 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
1423522459.004762 DEBUG: [Forwarder] onOutgoingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00/2/7316/243/0
^ 0 sec, 65.617 msec
1423522459.070379 DEBUG: [Forwarder] onIncomingData face=263 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00/2/7316/243/0
1423522459.070666 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
NFD2:
no log
NFD3:
1423522472.777791 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
^ 0 sec, 118.009 msec
1423522472.895800 DEBUG: [Forwarder] onIncomingData face=269 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00/2/7316/243/0
1423522472.896227 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00
1423522472.896580 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7072/data/%00%00/2/7316/243/0
Just for comparison, same logs for the previous frame:
NFD1:
1423522455.940876 DEBUG: [Forwarder] onIncomingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
1423522455.941184 DEBUG: [Forwarder] onOutgoingInterest face=263 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
^ 287 msec
1423522456.229018 DEBUG: [Forwarder] onIncomingData face=263 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00/3/7315/243/0
1423522456.242072 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
1423522456.252751 DEBUG: [Forwarder] onOutgoingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00/3/7315/243/0
^ 185 msec
1423522456.437698 DEBUG: [Forwarder] onIncomingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
1423522456.448964 DEBUG: [Forwarder] onOutgoingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00/3/7315/243/0
NFD2:
no log
NFD3:
1423522472.733178 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
1423522472.733593 DEBUG: [Forwarder] onOutgoingInterest face=269 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
^ 126 msec
1423522472.859767 DEBUG: [Forwarder] onIncomingData face=269 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00/3/7315/243/0
1423522472.860198 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00
1423522472.860492 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7071/data/%00%00/3/7315/243/0
What do you think, guys? Should I try more "NONE log level" tests?
I'll update to NFd 0.3.0 now.
Updated by Alex Afanasyev almost 10 years ago
Excessing logging could have contributed to significant processing overhead, as it involves disk operations (i'm assuming log output was written into file).
Updated by Peter Gusev almost 10 years ago
Getting errors starting NFD:
1423530677.239185 FATAL: [NFD] PK_Signer: key too short for this signature scheme
1423530679.235611 FATAL: [NRD] PK_Signer: key too short for this signature scheme
The same error when trying $ ndnsec-keygen /whoami| ndnsec-install-cert -:
Error: PK_Signer: key too short for this signature scheme
Any suggestions?
Updated by Alex Afanasyev almost 10 years ago
run just ndnsec-keygen /whoami. It probably throws some error which you don't see because of the piping.
Updated by Peter Gusev almost 10 years ago
still the same:
$ ndnsec-keygen /whoami
Error: PK_Signer: key too short for this signature scheme
Updated by Alex Afanasyev almost 10 years ago
I can only guess. Either some permission problem or there is a mixup of ndn-cxx versions...
Updated by Peter Gusev almost 10 years ago
I used git-HEAD of ndn-cxx and git-HEAD of NFD, if it helps...
Updated by Yingdi Yu almost 10 years ago
This error may happen when keychain fails to load the private key. In this particular case, I suspect that the private key is not generated as expected. If you have switched the tpm setting, you probably want to delete all the .ndn/ndnsec-* files/dirs, otherwise the inconsistency between pib and tpm may cause such a problem.
Updated by Alex Afanasyev almost 10 years ago
I understand that. In the lab I had several problems which were caused by multiple installation of ndn-cxx (in /usr/local, in /opt/local/, in just /usr). Can you double check.
If nothing works, remove ~/.ndn folder. If nothing works again, remote /usr/local/etc/ndn/client.conf and /usr/local/etc/ndn/nfd.conf (and copy defaults).
If nothing works again, create /usr/local/etc/ndn/client.conf from sample and set file-based TPM (i forgot the correct name for that).
Updated by Peter Gusev almost 10 years ago
Nothing helped. Please, see detailed logs below.
Checking ndn-cxx:
$ ls /usr/
X11 bin lib local share
X11R6 include libexec sbin standalone
$ ls /usr/local/include/
ndn ndn-cpp ndn-cxx ndn-tlv ndnboost
$ ls /usr/local
bin etc include lib man share
$ ls /opt/local/
Library bin etc include lib libexec man sbin share var
$ ls /opt/local/include/
autosprintf.h cursesw.h gettext-po.h ncurses.h tic.h
boost cursslk.h histedit.h ncurses_dll.h unctrl.h
bzlib.h db46 iconv.h openssl unicode
cryptopp editline layout panel.h zconf.h
curses.h eti.h libcharset.h sqlite3.h zlib.h
cursesapp.h etip.h libintl.h sqlite3ext.h
cursesf.h expat.h localcharset.h term.h
cursesm.h expat_external.h menu.h term_entry.h
cursesp.h form.h nc_tparm.h termcap.h
Seems not a problem of conflicting ndn-cxx versions.
Checking removing .ndn folder (nfd has TRACE log level):
$ rm -Rf ~/.ndn
$ nfd-start
Error: PK_Signer: key too short for this signature scheme
Password:
1423533979.696405 TRACE: [NameTree] lookup /
1423533979.696482 TRACE: [NameTree] insert /
1423533979.696544 TRACE: [NameTree] Name / hash value = 0 location = 0
1423533979.696647 TRACE: [NameTree] Did not find /, need to insert it to the table
1423533979.696759 INFO: [StrategyChoice] setDefaultStrategy /localhost/nfd/strategy/best-route/%FD%02
1423533979.697251 INFO: [InternalFace] registering callback for /localhost/nfd/fib
1423533979.697386 INFO: [InternalFace] registering callback for /localhost/nfd/faces
1423533979.697523 INFO: [InternalFace] registering callback for /localhost/nfd/strategy-choice
1423533979.697649 INFO: [InternalFace] registering callback for /localhost/nfd/status
1423533979.697765 INFO: [FaceTable] Added face id=1 remote=internal:// local=internal://
1423533979.793466 FATAL: [NFD] PK_Signer: key too short for this signature scheme
1423533981.692590 INFO: [RemoteRegistrator] Load remote_register section in rib section
1423533981.693111 INFO: [RemoteRegistrator] Load remote_register section in rib section
1423533981.693287 INFO: [RibManager] Listening on: /localhost/nfd/rib
1423533981.796775 FATAL: [NRD] PK_Signer: key too short for this signature scheme
Deleting nfd.conf and client.conf:
$ sudo rm /usr/local/etc/ndn/nfd.conf /usr/local/etc/ndn/client.conf
$ sudo cp /usr/local/etc/ndn/nfd.conf.sample /usr/local/etc/ndn/nfd.conf
$ nfd-start
ERROR: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
libc++abi.dylib: terminating with uncaught exception of type ndn::KeyChain::MismatchError: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
libc++abi.dylib: terminating with uncaught exception of type ndn::KeyChain::MismatchError: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
$ sudo cp /usr/local/etc/ndn/client.conf.sample /usr/local/etc/ndn/client.conf
$ nfd-start
ERROR: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
libc++abi.dylib: terminating with uncaught exception of type ndn::KeyChain::MismatchError: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
libc++abi.dylib: terminating with uncaught exception of type ndn::KeyChain::MismatchError: TPM locator supplied does not match TPM locator in PIB: tpm-file: != tpm-osxkeychain:
/usr/local/bin/nfd-start: line 55: 554 Abort trap: 6 nrd
That's something new... Anyways, continue with file TPM:
Trying file TPM:
$ tail /usr/local/etc/ndn/client.conf
; sqlite3
; pib=sqlite3
; "tpm" determines which Trusted Platform Module (TPM) should used by default in applications.
; If "tpm" is not specified, the default TPM will be used.
; Note that default TPM could be different on different system.
; If "tpm" is specified, it may have a value of:
; file
; osx-keychain
tpm=file
$ nfd-start
Error: PK_Signer: key too short for this signature scheme
1423534243.949454 INFO: [StrategyChoice] setDefaultStrategy /localhost/nfd/strategy/best-route/%FD%02
1423534243.949865 INFO: [InternalFace] registering callback for /localhost/nfd/fib
1423534243.949975 INFO: [InternalFace] registering callback for /localhost/nfd/faces
1423534243.950052 INFO: [InternalFace] registering callback for /localhost/nfd/strategy-choice
1423534243.950134 INFO: [InternalFace] registering callback for /localhost/nfd/status
1423534243.950211 INFO: [FaceTable] Added face id=1 remote=internal:// local=internal://
1423534244.096951 FATAL: [NFD] PK_Signer: key too short for this signature scheme
1423534245.944809 INFO: [RemoteRegistrator] Load remote_register section in rib section
1423534245.945287 INFO: [RemoteRegistrator] Load remote_register section in rib section
1423534245.945404 INFO: [RibManager] Listening on: /localhost/nfd/rib
1423534246.087423 FATAL: [NRD] PK_Signer: key too short for this signature scheme
Updated by Alex Afanasyev almost 10 years ago
Whenever you change settings in client.conf, you need to remove ~/.ndn.
Btw. Is your home folder on some non-standard file system? There are known issues of sqlite3 and NFS.
Updated by Junxiao Shi almost 10 years ago
Excessing logging could have contributed to significant processing overhead, as it involves disk operations (i'm assuming log output was written into file).
I agree that disk operations for logging is a probable cause, because logger is implemented using std::clog <<, and this operation is synchronous.
To eliminate this cause, keep DEBUG log level, but redirect stderr to a file on ramdisk (eg. /dev/shm/nfd.log) instead of hard drive.
Updated by Jeff Burke almost 10 years ago
Whenever you change settings in client.conf, you need to remove
~/.ndn.Btw. Is your home folder on some non-standard file system? There are known issues of sqlite3 and NFS.
It's a typical Mac OS X filesystem. (hpfs, I suppose)
Updated by Peter Gusev almost 10 years ago
Removing ~/.ndn folder and using default nfd.conf and client.conf helped.
I've run tests for the configuration when the bug was revealed (Forwarder DEBUG and UdpFace TRACE on intermediate hub) and observed two similar cases (again, test run was about ~10 min like usual).
For the configuration with logging disabled, I didn't observe this bug.
I'll keep you updated if I'll find out anything new this week.
Updated by Junxiao Shi almost 10 years ago
I've run tests for the configuration when the bug was revealed (
Forwarder DEBUGandUdpFace TRACEon intermediate hub) and observed two similar cases (again, test run was about ~10 min like usual).
For the configuration with logging disabled, I didn't observe this bug.
This is compatible with my guess in note-33.
Please run another experiment using the same system as note-35:
- keep logging on (
Forwarder DEBUGUdpFace TRACE) - redirect logs to
/dev/shm/nfd.log(or another path that is mapped to memdisk), instead of hard drive
If problem disappears, log writing is the bottleneck.
If problem persists, log generation is the bottleneck.
Please also run experiments using a Linux box as router.
Updated by Peter Gusev almost 10 years ago
I've run test on MacOS with writing logs to a file on a ramdisk (in-memory). The problem persists:
Case 1
NFD1
1423781206.076750 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.077225 DEBUG: [Forwarder] onOutgoingInterest face=259 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
^ .18 sec, 181.510000 msec
1423781206.258735 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.259210 DEBUG: [Forwarder] onOutgoingInterest face=259 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
^ .56 sec, 565.279000 msec
1423781206.824489 DEBUG: [Forwarder] onIncomingData face=259 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
1423781206.824841 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.825089 DEBUG: [Forwarder] onOutgoingData face=265 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
NFD2
1423781206.647413 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.647768 DEBUG: [Forwarder] onOutgoingInterest face=264 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
^ .01 sec, 10.660000 msec
1423781206.658428 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.660769 DEBUG: [Forwarder] onIncomingData face=264 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
1423781206.661062 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781206.661313 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
^ .10 sec, 100.718000 msec
1423781206.762031 DEBUG: [Forwarder] onInterestFinalize interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00 satisfied
NFD3
1423781208.310953 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781208.311478 DEBUG: [Forwarder] onOutgoingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781208.313922 DEBUG: [Forwarder] onIncomingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
1423781208.314448 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00
1423781208.314822 DEBUG: [Forwarder] onOutgoingData face=265 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15155/data/%00%00/3/15678/522/0
Case 2
NFD1
1423781224.225285 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.225677 DEBUG: [Forwarder] onOutgoingInterest face=259 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
^ .16 sec, 168.895000 msec
1423781224.394572 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.395050 DEBUG: [Forwarder] onOutgoingInterest face=259 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
^ .19 sec, 194.732000 msec
1423781224.589782 DEBUG: [Forwarder] onIncomingData face=259 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
1423781224.590154 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.590448 DEBUG: [Forwarder] onOutgoingData face=265 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
NFD2
1423781224.067487 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.068338 DEBUG: [Forwarder] onOutgoingInterest face=264 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
^ .16 sec, 168.644000 msec
1423781224.236982 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.237556 DEBUG: [Forwarder] onOutgoingInterest face=264 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
^ .19 sec, 191.210000 msec
1423781224.428766 DEBUG: [Forwarder] onIncomingData face=264 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
1423781224.429251 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781224.429647 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
^ .10 sec, 102.126000 msec
1423781224.531773 DEBUG: [Forwarder] onInterestFinalize interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00 satisfied
NFD3
1423781226.078766 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781226.079160 DEBUG: [Forwarder] onOutgoingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781226.084523 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781226.088801 DEBUG: [Forwarder] onIncomingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
1423781226.089190 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00
1423781226.089482 DEBUG: [Forwarder] onOutgoingData face=265 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15672/data/%00%00/2/16213/540/0
Updated by Junxiao Shi almost 10 years ago
I don't think log generation could be causing this Bug, because every packet should generate the same amount of log lines, which is inconsistent with the pattern of "occurring nominally every 2-3 minutes".
Writing logs to ramdisk eliminates the bottleneck of disk access. However, NFD process still does synchronous syscalls to the kernel's filesystem module.
I suggest disabling logging for now, and reenable logging after #2513 completes.
Updated by John DeHart almost 10 years ago
I have been going through some of the sets of log files that Peter gave me and have
come across something that might need explaining.
This is a case where the consumer seems to be the one that gets jammed up. The Hub and Producer
both seem to process and send Interests and Data in a timely way.
Eventually the Consumer APP resends the Interests.
Here is the Consumer NFD log messages for the original Interests:
1423189526.462412 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189526.462737 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189526.463005 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=305112104 from=270 newPitEntry-to=265
1423189526.463366 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189526.463653 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189526.463902 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=2522549811 from=270 newPitEntry-to=265
1423189526.464237 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189526.464541 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189526.464798 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=166698611 from=270 newPitEntry-to=265
Here is the Consumer NFD log messages for the re-send of the Interests 600+ms later:
1423189527.095527 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189527.109664 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189527.126382 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=8808564 from=270 retransmit-retry-to=265
1423189527.146407 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189527.164608 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189527.179107 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=3030726010 from=270 retransmit-retry-to=265
1423189527.202391 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189527.216815 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189527.235703 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=436933208 from=270 retransmit-retry-to=265
What I find interesting is the time between the ‘onIncomingInterest’ message and the onOutgoingInterest.
For the original Interest 0 that is 0.325 ms
For the re-send Interest 0 that is 14.137 ms
Here is an example for an Interest slightly before the resend one above:
1423189526.896900 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%00
1423189526.912839 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%00
This one takes 15.939 ms and I believe this is NOT a resend but is the original request for this Interest.
I have not removed any log messages between the onIncomingInterest and the onOutgoingInterest.
What would cause this time to increase from a fraction of a ms to 14+ ms?
Updated by Junxiao Shi almost 10 years ago
What would cause this time to increase from a fraction of a ms to 14+ ms?
In BestRouteStrategy2, 'newPitEntry-to' and 'retransmit-retry-to' take different code paths, and it's normal for 'retransmit-retry-to' to be slower than 'newPitEntry-to'.
See BestRouteStrategy2::afterReceiveInterest function impl.
Updated by John DeHart almost 10 years ago
But I think I have shown two cases, one which would be a new and one a retransmit and they both take over 14 ms.
And, 14 ms? That is a lot of processing time compared to 0.3 ms.
I am continuing to analyze the log files I have. I'll have more details soon but I think there is a period of time
where ALL Interests take this kind of time between inComing and outGoing.
Updated by John DeHart almost 10 years ago
So, lets take a look at a larger set of log messages around the retransmit of the
original Interests in question:
1423189526.896900 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%00
1423189526.912839 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%00
1423189526.932740 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%00?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=153505309 from=270 newPitEntry-to=265
1423189526.956603 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%01
1423189526.970187 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%01
1423189526.986366 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%01?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=3861357429 from=270 newPitEntry-to=265
1423189527.007187 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%02
1423189527.024547 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%02
1423189527.039788 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7646/data/%00%02?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=1621725226 from=270 newPitEntry-to=265
1423189527.064591 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7642/data/%00%01
1423189527.078460 DEBUG: [Forwarder] onOutgoingData face=270 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7642/data/%00%01/2/7906/263/0
1423189527.095527 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189527.109664 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00
1423189527.126382 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%00?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=8808564 from=270 retransmit-retry-to=265
1423189527.146407 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189527.164608 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01
1423189527.179107 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%01?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=3030726010 from=270 retransmit-retry-to=265
1423189527.202391 DEBUG: [Forwarder] onIncomingInterest face=270 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189527.216815 DEBUG: [Forwarder] onOutgoingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02
1423189527.235703 DEBUG: [BestRouteStrategy2] /ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/7643/data/%00%02?ndn.MustBeFresh=1&ndn.InterestLifetime=5000&ndn.Nonce=436933208 from=270 retransmit-retry-to=265
First we have three Interests for delta 7646. These are all treated by BestRouteStrategy2 as newPitEntry.
Then we have one Interest for delta 7642. This apparently has local data already cached as we see
an immediate (14ms) onOutgoingData.
Then we have the three Interests for delta 7643. These are all treated by BestRouteStrategy2 as retransmit.
If we look at the first of the delta 7646 Interests, the log messages for it show
15.939 ms between inComing and outGoing and 19.901 ms between outgoing and BestRouteStrategy2 messages.
That is 35.840 ms for this one Interest. With that kind of processing time for one Interest
we are down to less than 30 Interests a second.
Lets jump ahead to the Interest for delta 7642 that already has local data cached.
That takes 13.869 ms. Is it taking us that long to search the Content Store?
Am I missing something or is there something very strange going on here?
It could be that there is something going on the OS that is causing this, but whatever
it is we need to understand it.
Updated by Junxiao Shi almost 10 years ago
First please make sure ndn-cxx and NFD are compiled in release mode. If either is compiled with --debug, any benchmark is meaningless.
The analysis below assumes this condition is satisfied. If not, redo the benchmark in release build of git-HEAD version.
In forwarding pipelines,
- PIT lookup happens for every incoming Interests
- if PIT entry already exists,
- no ContentStore lookup
- 'retransmit-retry-to'
- if PIT entry does not exist, it's inserted, then ContentStore lookup is performed
- if HIT, Data is returned, and strategy is not triggered
- if MISS, 'newPitEntry-to'
According to #2254 note-3 benchmark, a ContentStore lookup takes less than 0.020ms on OSX.
NFD as a userspace application does not have guaranteed CPU time.
It is possible that kernel is giving NFD less CPU time.
This factor can be analyzed by looking at kernel scheduler log, and can be eliminated by decreased NICE value of NFD process.
Updated by Jeff Burke almost 10 years ago
Unless the machines are heavily loaded, it is unlikely that kernel scheduling is the cause of significant processing time variation. It seems worth considering such questions in terms of what's going on within NFD, rather than external factors, given that (I think) we are looking at light load circumstances.
Updated by Peter Gusev almost 10 years ago
NFDs were built in release mode and there was no heavy load on the machines (NFD with logging enabled was taking up to 30% CPU on the intermediate hub).
Updated by Junxiao Shi almost 10 years ago
note-39 and note-42 are extracted from CONSUMER node. NdnCon may take away considerable CPU time.
Please analyze kernel scheduler log to eliminate that factor, or decrease NICE value of NFD process to reduce its possible influence.
Updated by John DeHart almost 10 years ago
Junxiao Shi wrote:
note-39 and note-42 are extracted from CONSUMER node. NdnCon may take away considerable CPU time.
Please analyze kernel scheduler log to eliminate that factor, or decrease NICE value of NFD process to reduce its possible influence.
I am unfamiliar with the 'kernel scheduler log' on MacOS.
Can someone give me a pointer to where and what this is?
Updated by John DeHart almost 10 years ago
I think it makes sense to take a look at the OS scheduling, load, etc.
But, I would also submit that the problem is not isolated to just the consumer or producer
where NdnCon is running. I have nfd log examples from the hub where there are
currently unexplainable delays.
Here is one example of data processing on the hub that is quite long:
1423189811.070385 DEBUG: [Forwarder] onIncomingData face=264 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15753/data/%00%01/2/16297/543/0
1423189811.070726 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15753/data/%00%01
1423189811.070974 DEBUG: [Strategy] beforeSatisfyPendingInterest pitEntry=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15753/data/%00%01 inFace=264 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15753/data/%00%01/2/16297/543/0
1423189811.387738 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/15753/data/%00%01/2/16297/543/0
These are four log messages taken directly from nfd.log from one of Peter's experiments.
Nothing has been removed from between these messages.
'onIncomingData' to 'onIncomingData matching' : 0.341 ms
'onIncomingData matching' to 'beforeSatisfyPendingInterest': 0.248 ms
'beforeSatisfyingPendingInterest' to 'onOutgoingData' : 316.764 ms
From onIncomingData to onOutgoingData, we have an elapsed time of 317 ms.
Updated by Junxiao Shi almost 10 years ago
If the Bug is in Forwarding, it should be reproducible using standard tools with any kind of face.
However, I'm unable to reproduce "more than 250ms delay" in either git-HEAD or v0.2.0, which indicates that it's not a Forwarding problem.
I have tried the following setup:
Ubuntu 14.10 with Boost 1.55, ndn-cxx:commit:c759a20046bce82a83c7956d3a28739b0be1f982, nfd:commit:73b909a5142eb4a62aa9b3c1c9453bcb0f23c9fc, ndn-tlv-ping modified to use SHA256 signing and permit 1ms minimum interval.
Log level is default=INFO Forwarder=DEBUG; log is written to VirtualBox virtual disk which is mapped to a file on SATA hard drive.
nohup nfd-start &> nfd.log
nohup ndnpingserver /A &> ping-server.log &
nohup ndnping -i 5 -c 180000 /A &> ping-client.log &
NFD's CPU usage is around 25% of a core.
The maximum RTT reported in ping-client.log is 9.415ms, which means there isn't any delay longer than that.
I also tried v0.2.0:
NFD's CPU usage is around 23% of a core.
The maximum RTT reported in ping-client.log is 12.249ms, which means there isn't any delay longer than that.
Updated by Jeff Burke almost 10 years ago
Thanks for trying this out. However, this experiment only shows that it is not an issue for your test traffic on Linux, not that there is no forwarder issue.
I would encourage you to try to reproduce this bug with ndnrtc itself, so you can examine the same type of traffic that is causing the problem seen by UCLA and WUSTL. Is that possible where you are, or could you login remotely to Peter's hub or WUSTL?
Updated by John DeHart almost 10 years ago
Update on testing at WUSTL:
We have, so far, been unable to reproduce this problem on ONL (Ubuntu-based) at WUSTL.
We continue to add to our test scenario to try to make it look more like ndnrtc
but as yet, no luck triggering a similar processing delay.
We are also getting ready to try a Mac-based test at WUSTL very like Peter's set up.
Updated by Jeff Burke almost 10 years ago
Hm, ok. Will look for mac specific issues, too, then.
Updated by Peter Gusev almost 10 years ago
- File Archive.zip Archive.zip added
I've run nice'd NFD with logging into a ramdisk:
$ sudo nice -n -20 nfd-start &> /Volumes/ramdisk
and tested for 20 minutes - no single problem at all.
Then, I run nice'd NFD with logging into a file on harddisk:
$ sudo nice -n -20 nfd-start &> ~/nfd.log
I got bunch of errors both caused by NdnCon producer and NFD (see more NFD logs excerpts attached):
NFD1:
1424204601.596225 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204601.596534 DEBUG: [Forwarder] onOutgoingInterest face=261 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
^ .20 sec, 206.865000 msec
1424204601.803399 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204601.803666 DEBUG: [Forwarder] onOutgoingInterest face=261 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
^ .20 sec, 201.995000 msec
1424204602.005661 DEBUG: [Forwarder] onIncomingData face=261 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
1424204602.006062 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204602.006286 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
^ .04 sec, 44.710000 msec
1424204602.050996 DEBUG: [Forwarder] onIncomingData face=261 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
1424204602.051283 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
NFD2:
1424204599.125677 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204599.126187 DEBUG: [Forwarder] onOutgoingInterest face=264 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
^ .40 sec, 405.842000 msec
1424204599.532029 DEBUG: [Forwarder] onIncomingData face=264 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
1424204599.532451 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204599.532813 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
^ .04 sec, 44.085000 msec
1424204599.576898 DEBUG: [Forwarder] onIncomingInterest face=266 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204599.577247 DEBUG: [Forwarder] onOutgoingData face=266 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
^ .10 sec, 101.687000 msec
1424204599.678934 DEBUG: [Forwarder] onInterestFinalize interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00 satisfied
NFD3:
1424204577.093169 DEBUG: [Forwarder] onIncomingInterest face=265 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204577.093545 DEBUG: [Forwarder] onOutgoingInterest face=268 interest=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
^ .05 sec, 58.318000 msec
1424204577.151863 DEBUG: [Forwarder] onIncomingData face=268 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
1424204577.152303 DEBUG: [Forwarder] onIncomingData matching=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00
1424204577.152602 DEBUG: [Forwarder] onOutgoingData face=265 data=/ndn/edu/ucla/remap/ndnrtc/user/remap/streams/cam/low/delta/1834/data/%00%00/2/1898/63/1
What's interesting in this case is that producer was affected too - I saw enlarged delays b/w frame publishings at random time moments. Can extensive writing to hard disk in one process (NFD in this case) seriously affect other processes that do I/O (enlarged delays between frames being captured from camera)? NdnCon logging was set to default, so there were no extensive logging in this process.
I later run nice'd NFD with logging into a ramdisk test again and confirm - no problems have occurred.
Full logs:
Updated by John DeHart almost 10 years ago
I have followed up on Peter's question
Can extensive writing to hard disk in one process (NFD in this case) seriously affect other processes that do I/O (enlarged delays between frames being captured from camera)?
I've just run these tests and so things are kind of rough but I wanted
to share as quickly as possible.
I have a simple bash script:
#!/bin/bash
rm -f date_and_disk_test.log
touch date_and_disk_test.log
while true
do
gdate +%s.%N >> date_and_disk_test.log
sleep 0.5
done
This should generate timestamps that are written to a file, each about 0.5 seconds after the previous.
While the above script is running, I run this on the same machine:
sudo find / -name "*a*" -print > /tmp/find.log
Then I use a crude python script to process the results:
#!/opt/local/bin/python
import sys
import os
import numpy
usage = "Usage: %s filename\n" % sys.argv[0]
def main(arv=None):
filename = sys.argv[1]
f = open(filename, 'r')
line1 = f.readline()
#print 'line1: ', line1
while (line1 != ''):
words = line1.split()
time1 = words[0]
line2 = f.readline()
if line2 == '':
#print 'Done'
sys.exit(0)
#print 'line1: ', line1
#print 'line2: ', line2
words = line2.split()
time2 = words[0]
timeDiff = float(time2) - float(time1)
print time1, ' ', time2, ' ', timeDiff
line1 = line2
if __name__ == '__main__':
status = main()
sys.exit(status)
And a crude bash script to display the results:
#!/bin/bash
./compareTimesInOut.py date_and_disk_test.log >& timeDiffs
echo -n "total: " ; wc -l timeDiffs
echo -n " 0.4*: " ; grep " 0\.4" timeDiffs | wc -l
echo -n " 0.5*: " ;grep " 0\.5" timeDiffs | wc -l
echo -n " 0.6*: " ;grep " 0\.6" timeDiffs | wc -l
echo -n " 0.7*: " ;grep " 0\.7" timeDiffs | wc -l
echo -n " 0.8*: " ;grep " 0\.8" timeDiffs | wc -l
echo -n " 0.9*: " ;grep " 0\.9" timeDiffs | wc -l
echo -n " 1.0*: " ;grep " 1\.0" timeDiffs | wc -l
echo -n " 1.1*: " ;grep " 1\.1" timeDiffs | wc -l
echo -n " 1.2*: " ;grep " 1\.2" timeDiffs | wc -l
echo -n " 1.3*: " ;grep " 1\.3" timeDiffs | wc -l
echo -n " 1.4*: " ;grep " 1\.4" timeDiffs | wc -l
echo -n " 1.5*: " ;grep " 1\.5" timeDiffs | wc -l
echo -n " 1.6*: " ;grep " 1\.6" timeDiffs | wc -l
echo -n " 1.7*: " ;grep " 1\.7" timeDiffs | wc -l
echo -n " 1.8*: " ;grep " 1\.8" timeDiffs | wc -l
echo -n " 1.9*: " ;grep " 1\.9" timeDiffs | wc -l
echo -n " 2.* : " ;grep " 2\." timeDiffs | wc -l
echo -n " 3.* : " ;grep " 3\." timeDiffs | wc -l
echo -n " 4.* : " ;grep " 4\." timeDiffs | wc -l
I have run this on my MacBook Pro (MacOS), an ONL pc1core (Ubuntu) and an ONL pc2core (Ubuntu).
Here are the results:
MacOS:
total: 891 timeDiffs
0.4*: 0
0.5*: 721
0.6*: 74
0.7*: 26
0.8*: 20
0.9*: 14
1.0*: 14
1.1*: 8
1.2*: 2
1.3*: 1
1.4*: 2
1.5*: 3
1.6*: 1
1.7*: 0
1.8*: 0
1.9*: 1
2.* : 3
3.* : 1
4.* : 0
ONL pc1core:
total: 1624 timeDiffs
0.4*: 0
0.5*: 1624
0.6*: 0
0.7*: 0
0.8*: 0
0.9*: 0
1.0*: 0
1.1*: 0
1.2*: 0
1.3*: 0
1.4*: 0
1.5*: 0
1.6*: 0
1.7*: 0
1.8*: 0
1.9*: 0
2.* : 0
3.* : 0
4.* : 0
ONL pc2core:
total: 3458 timeDiffs
0.4*: 0
0.5*: 3458
0.6*: 0
0.7*: 0
0.8*: 0
0.9*: 0
1.0*: 0
1.1*: 0
1.2*: 0
1.3*: 0
1.4*: 0
1.5*: 0
1.6*: 0
1.7*: 0
1.8*: 0
1.9*: 0
2.* : 0
3.* : 0
4.* : 0
So, on Ubuntu, I see no sizable impact of the find on the bash script running and outputting to a file.
On MacOS, well, things look pretty bad. There is as much as 3 seconds at times between my timestamps.
I think the answer to Peter's question is a resounding, "On MacOS, YES!"
Where do we go from here?
I will be running more tests like this with different nice levels.
We should probably also understand MacOS Spotlight indexing. How often does
it run to re-index? Could it be causing some of NdnCon's and nfd's problems?
If it turns out that these results hold up, then we will need to come up
with a set of configuration suggestions for MacOS NDN end hosts. Otherwise
apps will suffer greatly.
Updated by John DeHart almost 10 years ago
Sorry, posted the wrong version of one of the scripts above.
The '\' to escape the '.' was left out.
#!/bin/bash
./compareTimesInOut.py date_and_disk_test.log >& timeDiffs
echo -n "total: " ; wc -l timeDiffs
echo -n " 0.4*: " ; grep " 0.4" timeDiffs | wc -l
echo -n " 0.5*: " ;grep " 0.5" timeDiffs | wc -l
echo -n " 0.6*: " ;grep " 0.6" timeDiffs | wc -l
echo -n " 0.7*: " ;grep " 0.7" timeDiffs | wc -l
echo -n " 0.8*: " ;grep " 0.8" timeDiffs | wc -l
echo -n " 0.9*: " ;grep " 0.9" timeDiffs | wc -l
echo -n " 1.0*: " ;grep " 1.0" timeDiffs | wc -l
echo -n " 1.1*: " ;grep " 1.1" timeDiffs | wc -l
echo -n " 1.2*: " ;grep " 1.2" timeDiffs | wc -l
echo -n " 1.3*: " ;grep " 1.3" timeDiffs | wc -l
echo -n " 1.4*: " ;grep " 1.4" timeDiffs | wc -l
echo -n " 1.5*: " ;grep " 1.5" timeDiffs | wc -l
echo -n " 1.6*: " ;grep " 1.6" timeDiffs | wc -l
echo -n " 1.7*: " ;grep " 1.7" timeDiffs | wc -l
echo -n " 1.8*: " ;grep " 1.8" timeDiffs | wc -l
echo -n " 1.9*: " ;grep " 1.9" timeDiffs | wc -l
echo -n " 2.* : " ;grep " 2." timeDiffs | wc -l
echo -n " 3.* : " ;grep " 3." timeDiffs | wc -l
echo -n " 4.* : " ;grep " 4." timeDiffs | wc -l
Updated by Junxiao Shi almost 10 years ago
- Category set to Core
20150220 conference call discussed this Bug.
It's believed that this Bug is caused by IO contention due to excess logging, and the current workaround is disabling logging.
#2513 may help, but a deeper problem is: debug logs shouldn't be enabled on a production system (both routers and laptops).
Alex suggests having an access log such as those from Apache HTTP Server, that writes one line per request.
Junxiao points out that the concept of request in NFD would be same as packet.
Beichuan thinks this unnecessary because IP end hosts and routers won't log every IP packet.
Lan suggests keeping logging disabled (set to INFO level or above), and use ndndump when packet-level network diagnostic is needed.
Updated by John DeHart almost 10 years ago
My test results agree that it is IO contention but we should also note that it appears
to only be an issue on MacOS. I have not been able to produce any similar problems on Ubuntu.
I have also not been able to find any MacOS configuration that will work around the problem
while we have nfd DEBUG logging turned on.
We should also keep in mind that this is almost certainly a problem for applications as well
as nfd. If an application has heavy logging, or perhaps as part of the application they are
doing a lot of File IO, there could be performance problems on MacOS.
Updated by Junxiao Shi over 9 years ago
I have also not been able to find any MacOS configuration that will work around the problem while we have nfd DEBUG logging turned on.
Could you please run an additional experiment: disable NFD logging, but run another process that does roughly same amount of disk writes, and see whether NFD is affected.
The outcome of this experiment can predict whether #2513 would be an effective solution.
Updated by Alex Afanasyev almost 9 years ago
- Target version changed from v0.3 to v0.5
Updated by Junxiao Shi almost 7 years ago
- Status changed from New to Closed
note-58 went unanswered, and there's no more complaint of this issue, so I assume it's resolved.
Updated by Jeff Burke almost 7 years ago
I don't understand how non-response means the issue is resolved. We are still seeing packet processing delays in NDN-RTC, I think, as recently discussed; but let's leave closed and re-open if it becomes relevant again.